HOW TO SYNCHRONISE A UNIVERSAL REMOTE TO A TV,DVR,VCR AND OTHER DEVICES

  There are two ways to synchronise a univesal remote control to an electronic device.  The first of all, you should make sure that, there is setup codes for you device with the universal remote control you are going to synchronise it with.  This detail can be obtained from the code list of the universal remote control

Direct Code Entry Method

  If there is setup code for your device, with the list of universal remote control codes of the remote control you are going to synchronise with, you can adopt this method.
*  Press and Hold the SETUP button on the remote control, until the red indicator on the remote control stays ON, and release the Setup button.
**  Press and Release the desired Mode Button [TV,VCR,DVR Etc:-].  The red indicator on the remote control blinks and then stays lit.
***  Enter the 4 digit or 5 digit code from the code table of the remote for your device. After a valid code entry the the indicator on the remote turns OFF.  If the code entered is invalid, the red indicator will flash.
****  With your device ON, press CHANNEL UP.  If the device responds, no further action is required.  If some button/s on the remote do not operate your device, try an other code.  Select a code which have maximum functionality with the device. 

Code Search Method.

*  Manually turn ON the device to be controled.
**  Press and Hold the SETUP button on the remote control, until the red indicator stays ON, and release the SETUP button.
***  Press and Release the desired Mode Button [TV,DVR,VCR Etc:-].  The red indicator blinks once and stays ON.
****  Press the CHANNEL UP button repeatedly, upto 300 times, until the device to be controlled chages Channel.  The red indicator on the remote control blinks and stays lit.
*****  Press and Release MUTE BUTTON on the remote control to install the code.  The indicator light on the remote contro goes OFF.  That is all.