TO ENTER SERVICE MODE
- Turn down "volume" to "0".
- Press 'Mute" key on the remote control, and then press the key of "Menu" on the remote control. [Needs its original remote control to enter service mode]
- To call an item to adjust, press [CH + / CH -] keys on the remote control.
- Use "Volume + / Volume -" button on the remote control, to adjust the data value to selected item.
- Press "Power" button on the remote control to Store the adjusted data into memory, and to "Exit" service mode.
The introduction of Modes which are often used is below, the other design parameter mode, not permit to modify.
===============================================
M6 => The fast key is the key of "Language".
IFPL => Adjust the scale of picture and sound the IF signal.
TOP => Tune AGC voltage.
M13 => The fast key is the key of DVD.
DVD => The switch of DVD source.
DPF => The switch of DPF source.
M17 => not defined
LOGO => LOGO display.
BLUEBACK => Blue screen switch.
M24 => not defined.
AUTO => Auto revise.
M25 => The fast key is the key of "Title".
INIT => Initialization program.
M28 => The fast key is key of "0".
IIC BUS OPEN => Open BUS.
===============================================
- In scart mode, the system can automatically activate scart checking function to identify signal input modes [CVBS or RGB] and input signal character [16:9 or 4:3]; capable to receive PAL, NTSC, SECAM color systems. Very convenient to watch to VCR, Pickup Camera and other Disc's programs.
