Saturday, August 11, 2012

SAMSUNG HCR-4755W SERVICE ADJUSTMENTS [Contn]



Contn:

 ========= FACTORY DATA:  Video Adjust -2 ===========

 NO => ITEM => DATA

  1. ABL MODE = 3
  2. GAMMA = 1
  3. DPIC LEVEL = 2
  4. DC TRANS = 2
  5. ABL TH = 15
  6. VM LEVEL = 2
  7. VM CORING = 0
  8. VM f0 = 2
  9. VM LIMIT = 3
  10. VM DELAY = 0
  11. SHP CD GAIN = 1
  12. SHP f0 = 0
  13. SHP f1 GAIN = 3
  14. PRE/OVER = 1
  15. AKB TIMING = 11
  16. S ABL = 3
  17. P ABL = 10
  18. PICTURE LIMIT = 3
=====================================================

------------------ Video Adjust -3 ----------------

  1. H COMP = 12
  2. V COMP = 8
  3. PIN COMP = 0
  4. AFC COMP = 0
  5. CG HAO = 5
  6. CG VAO = 5
  7. BKG LEVEL = 25
  8. CM THRESHOLD = 42
  9. CM DET TIME = 0
  10. PIXEL SHIFT TIME - 60
  11. H_PEAKING = 2
  12. PFS = 2
  13. LPF 2 = 1
  14. PKCOR = 0
  15. CKILL = 2
  16. AFT ON/OFF = 1
  17. MELODY VOLUME = 10
========================================================

---------------Video Adjust -4 -------------------
  1. Y RF DELAY = 1
  2. YC AV DELAY = 5
  3. CHROMA BAND RF = 0
  4. CHROMA BAND VIDEO = 0
  5. CHROMA BAND S-VIDEO = 1
  6. IF COMP = 2
  7. IF COMP VIDEO = 4
  8. IF COMP S-VIDEO = 4
  9. 9883 RED CUT OFF = 128
  10. 9883 GREEN CUT OFF = 128
  11. 9883 BLUE CUT OFF = 128
  12. 9883 PHASE = 88
  13. 9883 SYNC LEVEL = 50
===========================================================
------------------- Video Adjust - 5 ---------------------
  1. BASE LEVEL = READ
  2. RFDB1_H_PEAKING = 0
  3. RFDB1_LPF2 = 1
  4. RFDB1_PKCOR = 0
  5. RFDB1_SHARPNESS = 75
  6. RFDB2_H_PEAKING = 0
  7. RFDB2_LPF2 = 1
  8. RFDB2_PKCOR = 1
  9. RFDB2_SHARPNESS = 50
  10. RFDB3_H_PEAKING = 0
  11. RFDB3_LPF2 = 2
  12. RFDB3_PKCOR = 1
  13. RFDB3_SHARPNESS = 20
  14. RFD B1_VALUE = 112
  15. RFDB2_VALUE = 200
  16. RFDB3_VALUE = 500
=============================================================

--------------- Video Adjust -6 --------------------
=============================================================
  1. ALPHAL = 128
  2. ALPHAU = 128
  3. CE_CUTOFF = 32
  4. CE_UPPER = 220
  5. CE GAINMAX L = 160
  6. CE GAINMAX U = 160
  7. GAIN1X = 16
  8. GAIN1Y = 8
  9. GAIN2X = 8
  10. GAIN 2Y = 4
  11. GAIN 3X = 1
  12. CORING_ON = 1
  13. CORING_TH1 = 2
  14. CORING_TH2 = 1
  15. CORING_TH3 = 1
  16. SD3_K = 8
  17. SKIN_X = 24
  18. SKIN_Y = 29
  19. SCALE_R = 75
  20. SCALE_ALPHA = 140
  21. GAMMA ON = 0
  22. DITHER MODE = 0
  23. NDON = 1
  24. NEOnDE = 1
  25. NEOnCE = 1
  26. RTH2 = 10
  27. SUB-CONTRAST = 128
  28. SUB-BRIGHTNESS = 0
=========================================================
------------  OPTION -------------
  1. Anynet Enable = On
  2. DNle = Off
  3. Panel Key = Enter
  4. LNA = On
  5. DVI = Off
  6. V-Chip = USA
==========================================================

Posted by at