SHARP DV28071 S SERVICE MODE - ADJUSTMENTS

• Remove the rear cover.
• Press the "service button" can be located on the video unit PWB-B.  
• "SHARP Software Service Ver" will be displayed.
• In service mode, remote control buttons change their function.  The only buttons required are:
• [CH + / CH -] & [Vol + / Vol -]; to select an item to adjust, and to adjust the data value to selected items respectively.
• After all adjustments, "Service button" should be pressed again to restore the normal function to TV.
• To memorize the adjusted item, 'Switch Off" the TV.

ADJUSTMENT MENUS

1. Horizontal Phase Shift.
2. Blanking Phase Shift.
3. Vertical Phase.
4. Vertical Size.
5. S-Correction.
6. Vertical Symmetry.
7. Horizontal amplitude [width]
8. East/West 1
9. Trapezoid 1
10. East/West 2
11. Trapezoid 2.
12. Chroma-Luma delay.
13. VCO Adjust
14. G2 adjustment [screen adjustment]
15. Red Cut-off
16. Green Cut-off.
17. Blue Cut-off.
18. Red Drive
19. Green Drive.
20. Blue Drive.