TO ENTER SERVICE MODE
- Before entering service mode, confirm that the settings of [TV/CATV] switch of the remote control unit is at "TV" side and the setting of [VCR/DVD] switch of the remote control unit is at the "VCR" side. If theses switches has not been properly set, cannot enter to Service Mode.
- Press 'Sleep Timer' key, and while the indication of Sleep Timer [0] Min is being displayed, Press [DISPLAY] key and [VIDEO STATUS] key on the remote control simultaneously.
- The Service Mode Screen will be displayed.
- Verify what to set in the Service Mode, and set whatever is necessary.
- Press the 'Back" key twice to return to normal screen.
- Select service items, using [CH + / CH-] key.
- To adjust the data value to selected item, use [Vol + / Vol-] key.
- Press "Back" key to "Exit" service menu mode.
Service Menu Screen
-----------------------------------------------------------------
Service Menu
1. Picture / sound 7. Panel
2. YC Sep 8. PP
3. White Balance 9. JP.
4. Memory Setup 0. HDMI
5. DD/CM
6. ---------
----------------------------------------------------------------
ASPECT / MULTI [ONE SCREEN]
- FULL = FULL
- PANO = PANORAMA
- CINE = CINEMA
- REGU = REGULAR
MULTI-SCREEN
- M1 = ONE SCREEN (FOR ADJUSTMENT)
- M 2-1 = SPLIT. 4:3
- M 2-2 = SPLIT. 16:9
- M4 = POP
- M12 = INDEX
VIDEO STATUS
- ST = STANDARD
- DA = DYNAMIC
- TH = THEATER
- GA = GAME
WHITE BALANCE
- H = HIGH
- L = LOW
IP CHANGE MODE
- FL = FRAME
- L1 = LINE
- 23 = COMPULSORY NATURAL CINEMA IN
MEMORY MODE
- MUTE = PRESS [MUTING] KEY
- DIR = CHANGE DATA THEN MEMORY AT THE SAME TIME.
SERVICE MODE SETTING
A = AUDIO
S = SIGNAL
D = DEFLECTION
F = FACTORY SETTING