TO ENTER SERVICE MODE
- Turn ON the set.
- Push buttons [1 => Mute => Display => Mute] in sequence by remote control.
- Service Mode Screen will be displayed as follows
=======================================
S2 SCRN
S5 IFC
S6 GEO
S8 W/B
S9 DP
S12 FACT
S7 PTRN NORMAL
=======================================
Use [Ch Up / Ch Dn] button on the remote control to select an item to adjust. The color of the selected item will turn RED
Use [Volume Up / Volume Dn] button on the remote control, to adjust the data value to selected item.
To memorize each setting item, have to press the "Display" button each time after an item has been adjusted.
SCREEN ADJUSTMENT (S2)
- Enter the service mode, and select service adjustment (S2).
- A horizontal line will be displayed on the screen.
- Adjust the Screen Volume [located on the flyback transformer] so that the horizontal line on screen may be disappeared.
- Press (Vol Up / Vol Dn) button to Exit the screen adjustment mode.
## IN THE SCREEN ADJUSTMENT MODE, DO NOT PRESS OTHER BUTTONS, EXCEPT VOLUME UP OR VOLUME DN BUTTON.