ENTERING INTO SERVICE MODE
- Turn ON the TV and select "Standard" on the picture adjustment mode.
- Turn OFF the TV [Standby].
- Enter [Mute => 1 => 8 => 2 => Power], in sequence by remote control unit.
- If the first attempt fails, re-do stems 1 to 3 again.
SERVICE MODE DISPLAY
----------------------------------------------------------------------------------------------------
DEFLECTION
VIDEO ADJUST 1
VIDEO ADJUST 2
VIDEO ADJUST 3
VIDEO ADJUST 4
VIDEO ADJUST 5
VIDEO ADJUST 6
VERSION INFORMATION
OPTION
RESET
----------------------------------------------------------------------------------------------------
Service Mode Control Keys
- To select Full Menu display / Move to parent menu => Press Menu
- To select and item to adjust, use [Up or Dn] keys.
- To adjust the data value to selected item, use [Right or Left] keys.
***************************************************************
FACTORY DEFAULT DATA: +DVI connection item is corresponded to DVI application model [HCR4245W].
NO => ITEM => INITIAL DATA
- V-AMP = 31
- V-SHIFT =32
- H EW = 31
- H SHIFT = 34
- V LIN = 7
- UP_LIN = 34
- V SC = LOW_LOW = 0
- V SC = 7
- H PAR = 20
- UP_COR = 31
- LOW_COR = 31
- H TRA = 31
- BOW = 31
- ANGLE = 31
- V POSITON = 31
- UP UGC = 0
- LO UGC = 0
- CXA LEFT BLK = 55
- CXA RIGHT BLK = 15
---------------------------------------------------------------------------------------------------------
-----------------VIDEO ADJUST - 1 ---------------------
===========================================================
NO => ITEM => INITIAL DATA
- RED CUTOFF = 25
- GREEN CUTOFF = 25
- BLUE CUTOFF = 25
- COLOR ON/OFF = 1
- CR OFFSET = 32
- CB OFFSET = 32
- RED DRIVE = 35
- GREEN DRIVE = 35
- BLUE DRIVE = 35
- SUB BRIGHT = 20
- SUB CONTRAST = 8
- SUB COLOR = 10 {10 / 15 / 15 / 10 => (NT-analog / Video / S-Video / 480i)} [FIX]
- SUB TINT = 6 {6 / 5 / 5 / 5} [FIX]
- CTI LEVEL = 1 {FIX}
- COL AXIS = 2 {fIX}
- LTI LEVEL = 1 [FIX]
- LTI MODE = 1 [FIX]
- SYSTEM = 2 [FIX].
=========================================================
Adjustments: contd:
No comments:
Post a Comment