Samsung LED LCD TV UN19D4003BD, UN26D4003BD, UN32D4003BD,
UN22D5003BF, UN40D5003BF, LN32D40*E*D wiring diagram how to update the
software, version check and more - U59C and U59E chassis
How to Upgrade SW and Micom
Insert
a USB drive containing the firmware upgrade downloaded from samsung.com into
the TV.
Be careful to not disconnect the power or remove the USB drive while
upgrades are being applied. The TV will turn off and turn on automatically
after completing the firmware upgrade. Please check the firmware version after
the upgrades are complete (the new version will have a higher number than the
older version). When software is upgraded, video and audio settings you have
When software is upgraded, video and audio settings you have you write down
your settings so that you can easily reset them after the upgrade.
Main SW upgrade
1. Store the software program named
"T-MX5FAUSC"(FHD) or "T-MX5HAUSC"(HD) in USB memory stick.
Connect the USB.
2. Click the MENU key in remote controller.
3. Select Support menu.
Locate the menu cursor
Software Upgrade menu.
4. Click the ENTER key.
5.
Click the ENTER key. - Wait for upgrade complete and check the
SW version.
How to check the SW version
Software
Upgrade can be performed by downloading the latest firmware from samsung.com to
a USB memory device. Current Version - the software already installed in the
TV.
Note : Software is represented as ‘Year/Month/Day-Version’
How to check the SW version
Use the main menu
1. Click the “menu”
key in remote controler.
2. Select Support menu.
3. Locate the menu cursor “Software Upgrade” menu.
4. Click the “info” key.
5. Check the Main SW and Micom version.
Wiring diagram
Position of Connectors
UN19D4003BD
UN32D4003BD - UN26D4003BD
UN22D5003BF
UN40D5003BF
LN32D40*E*D
Connector Functions and cables
No comments:
Post a Comment