UOC TDA93XX TDA83XX
1. The function of pin 20, 28, 29, 31, 32, 35 and 44 is dependent on the IC version (mono intercarrier FM demodulator /QSS IF amplifier and East-West output or not) and on some software control bits. The valid combinations are given in table.
2. The vertical guard function can be controlled via pin 49 or pin 50. the selection is made by means of the IVG bit in sub address 2BH.
1. The function of pin 20, 28, 29, 31, 32, 35 and 44 is dependent on the IC version (mono intercarrier FM demodulator /QSS IF amplifier and East-West output or not) and on some software control bits. The valid combinations are given in table.
2. The vertical guard function can be controlled via pin 49 or pin 50. the selection is made by means of the IVG bit in sub address 2BH.
1.When
additional (external) selectivity is required for FM-PLL system pin 32 can be
used as sound IF input. This function is
selected by means of SIF bit in subaddress 28H.
2. The reference output signal is only available for the CMB1/CMB0 setting of 0/1. for the other settings this pin is a switch output.
2. The reference output signal is only available for the CMB1/CMB0 setting of 0/1. for the other settings this pin is a switch output.
AN17821A/17823A Function: audio output and LA78040/78041/TDA8172A Function: vertical output
Typical
voltages of TDA93xx, LA76040, AN17821, TDA9859
Click on the tables to magnify