Panasonic TAU Service Menu
1, With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, ...) with the keys 3 and 4 selected items with VOL + / - adjusts the values.
Panasonic Plasma 3UY
Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service Menu mode CAT will comes up.
CAT is Computer Aided Test Menu
To select a mode parameter use the cursors keys on the remote control.
And press the Action key to access the menu.
To exit mode Press the R button.
Panasonic TX-25W3E Service Menu
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the item with Blue and Yellow line values.
To store the new press STORE.
1, With the TV on, adjust the volume to a minimum, put the key in OFF-ON TIMER.
Press RECALL on the remote control and simultaneously in the TV-VOL. With keys 1 and
2, selects nodes adjustment (CHK1, CHK2, ...) with the keys 3 and 4 selected items with VOL + / - adjusts the values.
Panasonic Plasma 3UY
Press the volume down & hold down the button on the plasma TV display.
Press 3 times the STATUS button on the remote control.
Status button is the one below Power button
The Service Menu mode CAT will comes up.
CAT is Computer Aided Test Menu
To select a mode parameter use the cursors keys on the remote control.
And press the Action key to access the menu.
To exit mode Press the R button.
Panasonic TX-25W3E Service Menu
Increase the bass to maximum, decrease treble to minimum, press RESET on the remote control and while in the TV-volume. Using the Teletext press RED and GREEN selects the item with Blue and Yellow line values.
To store the new press STORE.
To exit NORM (normalization).
Panasonic EURO-2 CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum.
Panasonic EURO-2 CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and
High-tone-regel to minimum.
Press 'F' button on TV.
Then press VOL- on TV and REVEAL on remote control at the same time.
Select press red and green buttons.
Adjust press yellow and blue buttons. Store press 'STR'. Exit press 'N' on remote control.
Panasonic TX-33AK10.
Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set
Panasonic TX-29AK1 Service Menu
Increase Bass to maximum. Decrease Treble to minimum. Hold down "index" Press "-" (minus) on the TV panel.
This Procedure works on the PK1 series as well and will work on TX-33AK10 series.
Panasonic MX-3C Service Menu
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'CH.UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'VOL-' local.
Panasonic EURO-1 CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and High-tone-regel to minimum.
Press VOL- on TV and reset on remote control in some time.
Select press red and green buttons.
Then press VOL- on TV and REVEAL on remote control at the same time.
Select press red and green buttons.
Adjust press yellow and blue buttons. Store press 'STR'. Exit press 'N' on remote control.
Panasonic TX-33AK10.
Bass to max.
Treble to min.
Hold down "index"
Press "-" (minus) on the front of the set
Panasonic TX-29AK1 Service Menu
Increase Bass to maximum. Decrease Treble to minimum. Hold down "index" Press "-" (minus) on the TV panel.
This Procedure works on the PK1 series as well and will work on TX-33AK10 series.
Panasonic MX-3C Service Menu
CTV Hotel Mode
ON: Press simultaneously 'OFF TIMER' on remote control and 'CH.UP' local.
OFF: Press simultaneously 'OFF TIMER' on remote control and 'VOL-' local.
Panasonic EURO-1 CTV Service Mode
In Sound-Menu Low-tone-regel to maximum and High-tone-regel to minimum.
Press VOL- on TV and reset on remote control in some time.
Select press red and green buttons.
Adjust: yellow and blue buttons.
Store press 'STORE'. Exit switch off the television.
Panasonic CT-215785
Turn on TV, short-circuit points FA1 - FA2.
Press ACTION (or MENU) and VOL + simultaneously.
Press POWER on the remote control to select sub menu of services.
With CANAL + / - select the item, with VOL + / -- adjusts the value.
To exit press POWER and ACTION (or MENU) simultaneously for 2 or 3 seconds.
Panasonic CT-215785
Turn on TV, short-circuit points FA1 - FA2.
Press ACTION (or MENU) and VOL + simultaneously.
Press POWER on the remote control to select sub menu of services.
With CANAL + / - select the item, with VOL + / -- adjusts the value.
To exit press POWER and ACTION (or MENU) simultaneously for 2 or 3 seconds.
Changhong 21BM91 chassis CN-18EAV2 service mode
To enter the DESIGN/SERVICE mode
Set the volume to no sound.
Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the factory mode.
In this case, red “S”is displayed on the upper center of the screen.
To exit from the S mode, turn off the Changhong TV set by the POWER button on the remote control.
Caution: The user service mode adjustment can be changed only when service personnel adjust the whole set data during servicing.
To enter the DESIGN/SERVICE mode
Set the volume to no sound.
Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the factory mode.
In this case, red “S”is displayed on the upper center of the screen.
To exit from the S mode, turn off the Changhong TV set by the POWER button on the remote control.
Caution: The user service mode adjustment can be changed only when service personnel adjust the whole set data during servicing.
As the control data have dramatic effects on functions and performance of the TV, service personnel should not tell user how to enter the SERVICE mode to avoid improper data settings.
Changhong TV R2938D Service Menu
Decrease volume to no sound,.
.press mute on remote control and menu button on TV panel at same time.
"S" appears on the screen and you can change and edit factory mode using pro+/- and vol +/-.
Save and exit setings press power button on remote control
Fujitec FTC Series.
Open Fujitec TV remote controls and find the button not in use above mute button,
There is a small hole in the remote casing and make holes for user access.
To change value press volume button and selecting parameter press program.
Save and exit the factory settings press the power button.
Mitochiba TV
Decrease volume of Mitochiba TV till no sound
Press recall on control remote.
Changhong TV R2938D Service Menu
Decrease volume to no sound,.
.press mute on remote control and menu button on TV panel at same time.
"S" appears on the screen and you can change and edit factory mode using pro+/- and vol +/-.
Save and exit setings press power button on remote control
Fujitec FTC Series.
Open Fujitec TV remote controls and find the button not in use above mute button,
There is a small hole in the remote casing and make holes for user access.
To change value press volume button and selecting parameter press program.
Save and exit the factory settings press the power button.
Mitochiba TV
Decrease volume of Mitochiba TV till no sound
Press recall on control remote.
Hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu.
Use program up and down button to select and volume up.down to change TV system value.
Exit and save change switch off the TV.
Microsonic TV
With the TV off position (standby mode),
using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode.
Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Memorex TV
Memorex TV in Stand By mode,
from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters,
with VOLUME up and down adjusts the television system value.
To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Shimasu Service Menu
TV turned on possition
press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE
in models which do not have the RECALL key.
To select the item: channel + / - to adjust: VOL + / -.
To return or end press MENU.
To save changes press
DISPLAY button of Shimasu television before exiting.
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five. [4 > 7 > 2 > 5]
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen,
then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control,
entering service button located below stop button.
Select press program +/- and change value press volume +/-.
Save settings and exit press P.P button.
Comet TV PT92J Service mode
Press simultaneously Volume down button on TV Panel and SUBPAGE button on remote control.
Press the Program up and down to select and change value press volume button (+/-)
Save and exit press TV button on remote control.
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colured key to select and store settings.
CCE Television HPS 2001 Service Menu
On the TV mother board press switch 702, change and edit data value press Volume key and Program key.
Daewoo LCD TV SL-110P Type DSL-20D1T Service Menu
Turn on your television and press key one, Mute, STATUS, MUTE in sequence within five to seven seconds.
Picture: 4, option: 5.
Change value press volume +/- and select press program +/-
Exit and save settings press and hold down the mute button for 2 seconds.
DAEWOO TV.Alcuni models
When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute).
Some models do not have the recall button, press it with the button display.
DUAL TV type TVM4xxx
Press Service button and keep pressing down right remote control if your remote control no service button please press any number and keep pressing till service menu appear on the tv screan.
Store your settings press Deal button and exit factory mode.
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control for access the button.
Exit and save change switch off the TV.
Microsonic TV
With the TV off position (standby mode),
using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode.
Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Memorex TV
Memorex TV in Stand By mode,
from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters,
with VOLUME up and down adjusts the television system value.
To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Shimasu Service Menu
TV turned on possition
press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE
in models which do not have the RECALL key.
To select the item: channel + / - to adjust: VOL + / -.
To return or end press MENU.
To save changes press
DISPLAY button of Shimasu television before exiting.
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five. [4 > 7 > 2 > 5]
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen,
then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control,
entering service button located below stop button.
Select press program +/- and change value press volume +/-.
Save settings and exit press P.P button.
Comet TV PT92J Service mode
Press simultaneously Volume down button on TV Panel and SUBPAGE button on remote control.
Press the Program up and down to select and change value press volume button (+/-)
Save and exit press TV button on remote control.
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colured key to select and store settings.
CCE Television HPS 2001 Service Menu
On the TV mother board press switch 702, change and edit data value press Volume key and Program key.
Daewoo LCD TV SL-110P Type DSL-20D1T Service Menu
Turn on your television and press key one, Mute, STATUS, MUTE in sequence within five to seven seconds.
Picture: 4, option: 5.
Change value press volume +/- and select press program +/-
Exit and save settings press and hold down the mute button for 2 seconds.
DAEWOO TV.Alcuni models
When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute).
Some models do not have the recall button, press it with the button display.
DUAL TV type TVM4xxx
Press Service button and keep pressing down right remote control if your remote control no service button please press any number and keep pressing till service menu appear on the tv screan.
Store your settings press Deal button and exit factory mode.
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control for access the button.
Select press program up or down Increase value press volume up or decrease press volume down.
Save settings press TV .
Save settings press TV .
Exit factory mode press power.
Elta TV Type EL20M05TXS Service Menu
Open the Elta television remote control and short the IC pin 10 and 17 for 1 second,
Use the Yellow ,Blue, Green, and Red button for menu adjust,
Press Stop to test RGB.
Select press program up or down.
Press volume -/+ to change data value settings.
Save settings press OK button , restart your Television.
Elite TV type 21ES02 Factory Mode
Press Menu = menu = Q.view = mute, factory menu appear on the screen and select using program up or down button.
Change factory data value press volume -/+ . save and exit press Menu button.
Fuego TV 29PF3T/29PF4T Service Menu
Press volume down on TV panel and volume key on remote control at same time for 3 seconds.
Change or select parameter press program and change value data press volume key on remote control.
Exit from factory mode TV press PP key on remote control.
FUEGO TV FE 21VE7
Go to main menu and press button 4, 7, 2, 5
Use red Green Blue and Yellow button to select menu
change value settings press volume up or volume down button
Store settings press OK and exit from factory mode press Menu button.
FORMENTI TV SS70 Service Menu
Press volume up and down on TV pannel simultaneuosly with Power button on remote control.
Elta TV Type EL20M05TXS Service Menu
Open the Elta television remote control and short the IC pin 10 and 17 for 1 second,
Use the Yellow ,Blue, Green, and Red button for menu adjust,
Press Stop to test RGB.
Select press program up or down.
Press volume -/+ to change data value settings.
Save settings press OK button , restart your Television.
Elite TV type 21ES02 Factory Mode
Press Menu = menu = Q.view = mute, factory menu appear on the screen and select using program up or down button.
Change factory data value press volume -/+ . save and exit press Menu button.
Fuego TV 29PF3T/29PF4T Service Menu
Press volume down on TV panel and volume key on remote control at same time for 3 seconds.
Change or select parameter press program and change value data press volume key on remote control.
Exit from factory mode TV press PP key on remote control.
FUEGO TV FE 21VE7
Go to main menu and press button 4, 7, 2, 5
Use red Green Blue and Yellow button to select menu
change value settings press volume up or volume down button
Store settings press OK and exit from factory mode press Menu button.
FORMENTI TV SS70 Service Menu
Press volume up and down on TV pannel simultaneuosly with Power button on remote control.
Make change data press and select value use program and volume button.
Exit and save setings press TV
FINLUX TV PT92 CTW2825
Press SUBPAGE on the remote control and volume - in TV pannel at same time and select press program, change data value press volume button.FINLUX TV PT92 CTW2825 Service Menu
Ferguson TV Type W7023U
Switch on your television and go to standby mode.
FINLUX TV PT92 CTW2825
Press SUBPAGE on the remote control and volume - in TV pannel at same time and select press program, change data value press volume button.FINLUX TV PT92 CTW2825 Service Menu
Ferguson TV Type W7023U
Switch on your television and go to standby mode.
When The television in stndby mode Press main power to switch off your Ferguson TV, next press and hold Program dwn and volume dwn at same time and then switch On The Ferguson TV usein main switch.
Goodmans LCD TV GTV26W3LCD
Press M button and you will Go to main menu,
press 4, 7, 2 and 5 to open factory mode. Select parameter use program button and change value use volume button.
Exit from factory mode press TV and power button on remote control.
GRUNDIG TV ARGANTO 70
Turn On Television, decrease volume to no sound.
Goodmans LCD TV GTV26W3LCD
Press M button and you will Go to main menu,
press 4, 7, 2 and 5 to open factory mode. Select parameter use program button and change value use volume button.
Exit from factory mode press TV and power button on remote control.
GRUNDIG TV ARGANTO 70
Turn On Television, decrease volume to no sound.
Press mute buton keep hold.
Additonally press mute button on TV pannel, the mute sign on the screen is go to yellow colour.
Software version show on the screen.
Press menu to select and volume button to change data value.
Save setting press recall and exit press STILL.
GRUNDIG Xepia TV 42 PW110 6605
Turn On Television, Press Menu, 9, 3, 0, 1, menu, 8, 5, 0, 0
Select parameter press program button and change value press volume button.
Exit and save settings press menu button.
GRUNDIG LCD 38-9210
Press AV button on the remote control and OK button on TV Panel at the same time.
Factory mode appear on the screan and you can select parameter using program up or down button and change the value data by Pressing volume up to increase or volume down to decrease.
Exit and save setting press power on remote control and switch off your television.
GRUNDIG LCD Service Menu
CUC1806 CTV Factory Default Values Resetting Buttons 'AUX', 'OK'.
CUC1806 CTV Service Mode Menu guide: 'i', 'Dialog Center', 'Service', 'Only
for retailer', 'Code 8500'.
CUC1821 CTV Child Lock Cancel Press Volume up, Volume down, Program down, Program up, OK.
Factory mode will appear on the screen.
Haier HTR20 20" CRT TV
Press MENU button on TV panel and MENU button on remote control at the same time.
Select press program and change value press volume up or down
ITT Television.
Turn on TV (stand by mode) press the following sequence of remote control: MUTE,
three, Seven, Two, POWER.
Turn On Television, Press Menu, 9, 3, 0, 1, menu, 8, 5, 0, 0
Select parameter press program button and change value press volume button.
Exit and save settings press menu button.
GRUNDIG LCD 38-9210
Press AV button on the remote control and OK button on TV Panel at the same time.
Factory mode appear on the screan and you can select parameter using program up or down button and change the value data by Pressing volume up to increase or volume down to decrease.
Exit and save setting press power on remote control and switch off your television.
GRUNDIG LCD Service Menu
CUC1806 CTV Factory Default Values Resetting Buttons 'AUX', 'OK'.
CUC1806 CTV Service Mode Menu guide: 'i', 'Dialog Center', 'Service', 'Only
for retailer', 'Code 8500'.
CUC1821 CTV Child Lock Cancel Press Volume up, Volume down, Program down, Program up, OK.
Factory mode will appear on the screen.
Haier HTR20 20" CRT TV
Press MENU button on TV panel and MENU button on remote control at the same time.
Select press program and change value press volume up or down
ITT Television.
Turn on TV (stand by mode) press the following sequence of remote control: MUTE,
three, Seven, Two, POWER.
With the key 10 selects the item and Volume up / down to adjusts the value.
To exit and save changes press ITT television POWER switch .
IRT Television.
Turn on IRT TV pres in the IRT remote control, MENU, QVIEW, MUTE.
IRT Television.
Turn on IRT TV pres in the IRT remote control, MENU, QVIEW, MUTE.
With PROGRAM up and down to select items, with VOLUME up and down to changes the value of the clock with the key changes sub. Menus
JWIN Service mode
Enter factory mode menu press PROD, with DISPLAY MUTE or you scroll through the pages, to enter SLEEP Sub-menu, select the position or channel Items, Volume + / - line value.
JVC
Turn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .
To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT.
Write down all settings before change all TV system value seting.
Ken Brown.
Press on the Ken Brown remote control the following sequence : SKIP, MUTE, BAND. With Channel + / - selected items. With Volume + / - adjusts the value.
JWIN Service mode
Enter factory mode menu press PROD, with DISPLAY MUTE or you scroll through the pages, to enter SLEEP Sub-menu, select the position or channel Items, Volume + / - line value.
JVC
Turn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .
To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT.
Write down all settings before change all TV system value seting.
Ken Brown.
Press on the Ken Brown remote control the following sequence : SKIP, MUTE, BAND. With Channel + / - selected items. With Volume + / - adjusts the value.
To exit and save changes press P (Picture) in the Ken Brown remote control.
Silva Service Menu
STV355FST CTV Service Mode
Silva Service Menu
STV355FST CTV Service Mode
MENU --> SERVICE --> OK --> input the number 0,8,9 use remote control of Silva TV.
Silver Service Menu
Place in the remote control of Silver TV the following sequence: MENU, Q VIEW, MUTE. With number keys select different sub-menus. With PROG + / - select the item, with VOL + / -- modifying the value. To change the menu keys. To exit press MENU button of Silver remote control.
Silver Service Menu
Place in the remote control of Silver TV the following sequence: MENU, Q VIEW, MUTE. With number keys select different sub-menus. With PROG + / - select the item, with VOL + / -- modifying the value. To change the menu keys. To exit press MENU button of Silver remote control.
Singer Service Menu
With the Singer TV turned on press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE in models which do not have the
RECALL key.
With the Singer TV turned on press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE in models which do not have the
RECALL key.
To select the item: press channel + / - to adjust: VOL + / -.
To return or end press MENU. To save changes press DISPLAY of Singer TV before exiting.
Siemens SAT Service Menu
Program Lock
Unlock: Press key-symbol and press the number 6 1 0 1 on remote control of Siemens SAT television.
Sigma Service Menu
Press RECALL AND VOL-in remote control of Sigma TV simultaneously.
To return or end press MENU. To save changes press DISPLAY of Singer TV before exiting.
Siemens SAT Service Menu
Program Lock
Unlock: Press key-symbol and press the number 6 1 0 1 on remote control of Siemens SAT television.
Sigma Service Menu
Press RECALL AND VOL-in remote control of Sigma TV simultaneously.
To move the sub-menus Factory, Balance B / W Adjust and press RECALL again in the remote and VOL - in the Sigma TV simultaneously. Item to select CH + / - to adjust value:
VOL + / -.
VOL + / -.
To save changes, press MUTE on the remote of Sigma TV.
Thomson TX-90 CTV Service Mode
Switch off TV with RC (st-by).
Switch off TV with main switch.
Wait a few sec till ST_BY LED switch off.
Simultaneously press VT button on RC and switch on TV with main switch.
Press VT button again.
Thomson ICC19 CTV Service Menu
Switch to Standby.
Switch off with the mains switch.
Press and hold 'Program down ' and 'Volume down' and then switch on with the mains switch.
Exit: switch off the television with mains witch.
Memorex TV
Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Majestic
Switch on Majestic TV, press remote control key button: SLEEP, MUTE, DISPLAY, MENU. With channel up and down select the parameters, with VOLUME up and down adjusts the value. To exit Majestic TV service mode press DISPLAY or SLEEP button.
Mitochiba TV
Decrese volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu.
Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.
Microsonic TV
With the TV off possition (stndby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Kyoto
In the Kyoto remote control (RC-F70) press the following sequence: SLEEP, MUTE, DSP, MENU. Channel + / - to select , adjust value with volume + / -. To exit press POWER button .
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colored key to select and store settings.
Comet TV PT92J Service mode
Press simultaneously Volume down button on TV Panel and SUBPAGE button on remote control.
Pres Program up and down to select and change value press volume button (+/-)
Save and exit press TV button on remote control.
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five.
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen, then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control, entering service button located
below stop button.Select press program +/- and change value press volume +/-.
Save setings and exit press P.P button.
China Brands
Changhong 21BM91 chassis CN-18EAV2 service mode
To enter the DESIGN/SERVICE mode Set the volume to no sound. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the factory mode. In this case, red “S”is displayed on the upper center of the screen. To exit from the S mode, turn off the Changhong TV set by the POWER button on the remote control. Caution: The user service mode adjustment can be changed only when service personnel adjust the whole set data during servicing. As the control data have dramatic effects on functions and performance of the TV, service personnel should not tell user how to enter the SERVICE mode to avoid improper data settings.
Changhong TV R2938D Service Menu
Decrease volume to no sound,..press mute on remote control and menu button on tv pannel at same time.
"S" appears on the screen and u can change and edit factory mode using pro+/- and vol +/-.
Save and exit setings press power button on remote control
Fujitec FTC Series.
Open Fujitec TV remote controls and find the button not in use above mute button, there is a small hole in the remote casing and make holes for user access. To change value press volume button and selecting parameter press program. Save and exit the factory settings press the power button.
Service M
Mitochiba TV
Decrese volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu.
Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.
Microsonic TV
With the TV off possition (stndby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Memorex TV
Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Shimasu Service Menu
TV turned on possition press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE in models which do not have the RECALL key. To select the item: channel + / - to adjust: VOL + / -.
To return or end press MENU. To save changes press
DISPLAY button of Shimasu television before exiting.
EUROPIAN BRANDS
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five.
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen, then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control, entering service button located
below stop button.Select press program +/- and change value press volume +/-.
Save setings and exit press P.P button.
Comet TV PT92J Service mode
Press simulataneously Volume down button on TV Panel and SUBPAGE button on remote control.
Pres Program up and down to select and change value press volume button (+/-)
Save and exit press TV buton on remote control.
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colured key to select and store settings.
CCE Television HPS 2001 Service Menu
On the TV mother board press switch 702, change and edit data value press Volume key and Program key.
Daewoo LCD TV SL-110P Type DSL-20D1T Service Menu
Turn on your television and press key one, mute STATUS, MUTE in sequence five to seven seconds.
Picture: 4, option: 5.
Change value press volume +/- and select press program +/-
Exit and save settings press and hold down the mute button for 2 seconds.
DAEWOO TV.Alcuni models
When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute).
Some models do not have the recall button, press it with the button display.
DUAL TV type TVM4xxx
Press Service button and keep pressing down right remote control if your remote control no service button please press any number and keep pressing
til service menu appear on the tv screan.
Store your settings press Deal button and exit factory mode press TV.
Elemis TV Type 5470 Service Menu
Connect the pin of ic SAA5290 proccessor
TV using SAA 5290ZP (CTV811S), connect the pin 20 to the ground
TV using SAA 5290PS (CTV811R), connect the pin 20 to the ground
Change data value press volume and select press program button.
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control
for access the buton.Select press program up or down Increase value press volume up or decrease press volume down.
Save settings press TV . Exit factory mode press power.
Thomson TX-90 CTV Service Mode
Switch off TV with RC (st-by).
Switch off TV with main switch.
Wait a few sec till ST_BY LED switch off.
Simultaneously press VT button on RC and switch on TV with main switch.
Press VT button again.
Thomson ICC19 CTV Service Menu
Switch to Standby.
Switch off with the mains switch.
Press and hold 'Program down ' and 'Volume down' and then switch on with the mains switch.
Exit: switch off the television with mains witch.
Memorex TV
Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Majestic
Switch on Majestic TV, press remote control key button: SLEEP, MUTE, DISPLAY, MENU. With channel up and down select the parameters, with VOLUME up and down adjusts the value. To exit Majestic TV service mode press DISPLAY or SLEEP button.
Mitochiba TV
Decrese volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu.
Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.
Microsonic TV
With the TV off possition (stndby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Kyoto
In the Kyoto remote control (RC-F70) press the following sequence: SLEEP, MUTE, DSP, MENU. Channel + / - to select , adjust value with volume + / -. To exit press POWER button .
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colored key to select and store settings.
Comet TV PT92J Service mode
Press simultaneously Volume down button on TV Panel and SUBPAGE button on remote control.
Pres Program up and down to select and change value press volume button (+/-)
Save and exit press TV button on remote control.
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five.
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen, then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control, entering service button located
below stop button.Select press program +/- and change value press volume +/-.
Save setings and exit press P.P button.
China Brands
Changhong 21BM91 chassis CN-18EAV2 service mode
To enter the DESIGN/SERVICE mode Set the volume to no sound. Then press and hold the MUTE button on the remote control, and press the MENU button on the TV to enter the factory mode. In this case, red “S”is displayed on the upper center of the screen. To exit from the S mode, turn off the Changhong TV set by the POWER button on the remote control. Caution: The user service mode adjustment can be changed only when service personnel adjust the whole set data during servicing. As the control data have dramatic effects on functions and performance of the TV, service personnel should not tell user how to enter the SERVICE mode to avoid improper data settings.
Changhong TV R2938D Service Menu
Decrease volume to no sound,..press mute on remote control and menu button on tv pannel at same time.
"S" appears on the screen and u can change and edit factory mode using pro+/- and vol +/-.
Save and exit setings press power button on remote control
Fujitec FTC Series.
Open Fujitec TV remote controls and find the button not in use above mute button, there is a small hole in the remote casing and make holes for user access. To change value press volume button and selecting parameter press program. Save and exit the factory settings press the power button.
Service M
Mitochiba TV
Decrese volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu.
Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.
Microsonic TV
With the TV off possition (stndby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment".
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television.
Recommendation: DO NOT alter the values shown in "OPTION".
Memorex TV
Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Shimasu Service Menu
TV turned on possition press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE in models which do not have the RECALL key. To select the item: channel + / - to adjust: VOL + / -.
To return or end press MENU. To save changes press
DISPLAY button of Shimasu television before exiting.
EUROPIAN BRANDS
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five.
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen, then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control, entering service button located
below stop button.Select press program +/- and change value press volume +/-.
Save setings and exit press P.P button.
Comet TV PT92J Service mode
Press simulataneously Volume down button on TV Panel and SUBPAGE button on remote control.
Pres Program up and down to select and change value press volume button (+/-)
Save and exit press TV buton on remote control.
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colured key to select and store settings.
CCE Television HPS 2001 Service Menu
On the TV mother board press switch 702, change and edit data value press Volume key and Program key.
Daewoo LCD TV SL-110P Type DSL-20D1T Service Menu
Turn on your television and press key one, mute STATUS, MUTE in sequence five to seven seconds.
Picture: 4, option: 5.
Change value press volume +/- and select press program +/-
Exit and save settings press and hold down the mute button for 2 seconds.
DAEWOO TV.Alcuni models
When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute).
Some models do not have the recall button, press it with the button display.
DUAL TV type TVM4xxx
Press Service button and keep pressing down right remote control if your remote control no service button please press any number and keep pressing
til service menu appear on the tv screan.
Store your settings press Deal button and exit factory mode press TV.
Elemis TV Type 5470 Service Menu
Connect the pin of ic SAA5290 proccessor
TV using SAA 5290ZP (CTV811S), connect the pin 20 to the ground
TV using SAA 5290PS (CTV811R), connect the pin 20 to the ground
Change data value press volume and select press program button.
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control
for access the buton.Select press program up or down Increase value press volume up or decrease press volume down.
Save settings press TV . Exit factory mode press power.
