Saturday, February 11, 2017

Service mode entry procedure of Televisions - different brands - 3 of 3

Elta TV Type EL20M05TXS Service Menu
Open the Elta television remote control and short the IC pin 10 and 17 for 1 second,
Use the Yellow ,Blue, Green, and Red button for menu adjust,
Press Stop to test RGB.
Select press program up or down.
Press volume -/+ to change data value settings.
Save settings press OK button , restart your Television.
Elite TV type 21ES02 Factory Mode
Press Menu = menu = Q.view = mute, factory menu appear on the screen and select using program up or dwn button.
Change factory data value press volume -/+ . save and exit press Menu button.
Elta TV Type EL20M05TXS Service Menu
Open the Elta television remote control and short the IC pin 10 and 17 for 1 second,
Use the Yellow ,Blue, Green, and Red button for menu adjust,
Press Stop to test RGB.
Select press program up or dwn.
Press volume -/+ to change data value settings.
Save settings press OK button , restart your Television
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control
for access the button. Select press program up or down Increase value press volume up or decrease press volume down. Save settings press TV . Exit factory mode press power.
Elite TV type 21ES02 Factory Mode
Press Menu = menu = Q.view = mute, factory menu appear on the screen and select using program up or down button. Change factory data value press volume -/+ . save and exit press Menu button.
Fuego TV 29PF3T/29PF4T Service Menu
Press volume down on TV panel and volume key on remote control at same time for 3 seconds.
Change or select tetrameter press program and change value data press volume key on remote control.
Exit from factory mode TV press PP key on remote control.
FUEGO TV FE 21VE7
Go to main menu and press button 4, 7, 2, 5
Use red Green Blue and Yellow button to select menu
change value settings press volume up or volume down button
Store settings press OK and exit from factory mode press Menu button.
Service Menu Fuego - FORMENTI TV SS70 Service Menu
Press volume up and down on TV panel simultaneously with Power button on remote control. make change data press and select value use program and volume button.
Exit and save settings press TV
FINLUX TV PT92 CTW2825
Press SUBPAGE on the remote control and volume - in TV panel at same time and select press program, change data value press volume button.
Ferguson TV Type W7023U
Switch on your television and go to standby mode. When The television in standby mode Press main power to switch off
your Ferguson TV, next press and hold Program dawn and volume down at same time and then switch On The Ferguson TV use in main switch.
Ferguson TV Type W7023 Service menu
Goodmans LCD TV GTV26W3LCD
Press M button and you will Go to main menu, 
press 4, 7, 2 and 5 to open factory mode. Select parameter use program button and change value use volume button.
Exit from factory mode press TV and power button on remote control.
GRUNDIG TV ARGANTO 70 - Service Menu Grundig Arganto
Turn On Television, decrease volume to no sound. Press mute button keep hold. Additionally press mute button
on TV panel, the mute sign on the screen is go to yellow color. Software version show on the screen. Press menu to select and volume buton to change data value. Save setting press recall and exit press STILL.
GRUNDIG Xepia TV 42 PW110 6605
Turn On Television, Press Menu, 9, 3, 0, 1, menu, 8, 5, 0, 0
Select parameter press program button and change value press volume button.
Exit and save settings press menu button.
GRUNDIG LCD 38-9210 
Press AV button on the remote control and OK button on TV Panel at the same time.
Factory mode appear on the screen and you can select parameter using program up or down button and change the value data by Pressing volume up to increase or volume down to decrease.
Exit and save setting press power on remote control and switch off your television.
Grundig television - CUC1806 CTV Factory Default Values Resetting Buttons 'AUX', 'OK'.
Grundig CUC1806 CTV Service Mode Menu guide: 'i', 'Dialog Center', 'Service', 'Only for retailer', 'Code 8500'.
Grundig CUC1821 CTV Child Lock Cancel Press Volume up, Volume down, Pprogram down, Pprogram up, OK.
Factory mode will appear on the screen.
Haier HTR20 20" CRT TV
Press MENU button on TV panel and MENU button on remote control at the same time.
Select press program and change value press volume up or down
Enjoy your favorite television shows and movies on the HTR20 CRT television by Haier. It features a digital comb filter which cleans up fuzzy images and displays accurate colors and stable images. The V-Chip Parental Control allows you to set your television to deny access to shows rated inappropriate for children based on national ratings that range from TV-Y to TV-MA. With a built-in ATSC/NTSC tuner, you can watch both digital and analog channels relayed over the air. You can enjoy all the capabilities of the HTR20 with the component input and AV input and output. Included with the TV is a full function remote control.
ITT Television.
Turn on TV (stand by mode) press the following sequence of remote control: MUTE, 
three, Seven, Two, POWER. With the key 10 selects the item and Volume up / down to adjusts the value. To exit and save changes press ITT television POWER switch .
IRT Television.
Turn on IRT TV pres in the IRT remote control, MENU, QVIEW, MUTE. With PROGRAM up and down to select 
items, with VOLUME up and down to changes the value of the clock with the key changes sub. Menus
JWIN Service mode
Enter factory mode menu press PROD, with DISPLAY MUTE or you scroll through the pages, to enter SLEEP Sub-menu, select the position or channel Items, Volume + / - line value.
JVC 
Turn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .
To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT. 
Write down all settings before change all TV system value seting.   .............................
JVC Service Menu
Turn on JVC TV, simultaneously press DISPLAY and VIDEO STATUS in JVC remote control .
To select items, press MENU UP / DOWN (upload / download). To change values MENU LEFT / RIGHT (left / right). To exit factory mode press EXIT. 
Write down all settings before change all TV system value seting.  ...................
Ken Brown. 
Press on the Ken Brown remote control the following sequence : SKIP, MUTE, BAND. With Channel + / - selected items. With Volume + / - adjusts the value. To exit and save changes press P (Picture) in the Ken Brown remote control.
Silva Service Menu 
STV355FST CTV Service Mode MENU --> SERVICE --> OK --> input the number 0,8,9 use remote control of Silva TV.
Silver Service Menu 
Place in the remote control of Silver TV the following sequence: MENU, Q VIEW, MUTE. With number keys select different sub-menus. With PROG + / - select the item, with VOL + / -- modifying the value. To change the menu keys. To exit press
MENU button of Silver remote control.
Singer Service Menu 
With the Singer TV turned on press the following sequence on the remote control: 1, MUTE, RECALL, MUTE. 1, MUTE, DISPLAY MUTE in models which do not have the 
RECALL key. To select the item: press channel + / - to adjust: VOL + / -. 
To return or end press MENU. To save changes press 
DISPLAY of Singer TV before exiting.
Siemens SAT Service Menu 
Program Lock
Unlock: Press key-symbol and press the number 6 1 0 1 on remote control of Siemens SAT television.
Sigma Service Menu 
Press RECALL AND VOL-in remote control of Sigma TV simultaneously. To move the sub-menus Factory, Balance B / W Adjust and press RECALL again in the remote and VOL - 
in the Sigma TV simultaneously. Item to select CH + / - to adjust value: 
VOL + / -. To save changes, press MUTE on the remote of Sigma TV.
Thomson TX-90 CTV Service Mode
Switch off TV with RC (st-by). Switch off TV with main switch. Wait a few sec till ST_BY LED switch off. Simultaneous press VT button on RC and switch on TV with main switch. Press VT button again.
Thomson ICC19 CTV Service Menu
Switch to Standby. Switch off with the mains switch. Press and hold 'Program down ' and 'Volume down' and then switch on with the mains switch. Exit: switch off the television with mains witch.
Memorex TV
Memorex TV in Stand By mode, from the control remote enter the key following sequence MUTE, DISPLAY, POWER button .
With channel up and down select the parameters, with VOLUME up and down adjusts the television system value. To exit Memorex TV factory mode menu press DISPLAY or SLEEP button.
Majestic
Switch on Majestic TV, press remote control key button: SLEEP, MUTE, DISPLAY, MENU. With channel up and down select the parameters, with VOLUME up and down adjusts the value. To exit Majestic TV service mode press DISPLAY or SLEEP button.
Mitochiba TV
Decrease volume of Mitochiba TV till no sound, press recall on control remote, hold down Volume on Mitochiba TV panel simultaneously, again press recall on control remote, use this step to enter next menu. 
Use program up and down button to select and volume up.down to change tv system value. Exit and save change switch off the TV.
Microsonic TV
With the TV off position (standby mode), using the remote control RD3401A press the following sequence: DISPLAY, MENU, three, eight, POWER, turn on the television in the service mode. Enter the option "Adjustment". 
Use program button up/down to select parameters and volume up/down to change the television value.
To exit and save changes , shut down your Television. 
Recommendation: DO NOT alter the values shown in "OPTION".
Kyoto 
In the Kyoto remote control (RC-F70) press the following sequence: SLEEP, MUTE, DSP, MENU. Channel + / - to select , adjust value with volume + / -. To exit press POWER button .
Elite TV type 25ES75 Factory Mode
Open your Remote control chasing and find the hidden button , made smal hole to in remote control
for access the button. Select press program up or down Increase value press volume up or decrease press volume down. Save settings press TV . Exit factory mode press power.
Elite TV type 21ES02 Factory Mode
Press Menu = menu = Q.view = mute, factory menu appear on the screen and select using program up or down button. Change factory data value press volume -/+ . save and exit press Menu button.
DUAL TV type TVM4xxx
Press Service button and keep pressing down right remote control if your remote control no service button please press any number and keep pressing. Til service menu appear on the tv screen.
Store  your settings press Deal button and exit factory mode press TV
Daewoo LCD TV SL-110P Type DSL-20D1T Service  Menu
Turn on your television and press key one, mute STATUS, MUTE in sequence five to seven seconds.
Picture: 4, option: 5. Change value press volume +/- and select press program +/-
Exit and save settings press and hold down the mute button for 2 seconds.
DAEWOO TV.Alcuni models 
When you turn on the TVC, press the following sequence of buttons on the remote control: (1 - mute - recall - mute).  Some models do not have the recall button, press it with the button display.
Celestial Television 21B33. Service Menu
Decrease volume to no sound, press and hold mute on remote control.
Press Menu key on TV panel until menu and D sign appears.
Use colored key to select and store settings.
Changhong TV R2938D Service Menu
Decrease volume to no sound,..press mute on remote control and menu button on tv pannel at same time.
"S" appears on the screen and u can change and edit factory mode using pro+/- and vol +/-.
Save and exit settings press power button on remote control
Comet TV PT92J Service mode
Press simultaneously Volume down button on TV Panel and SUBPAGE button on remote control.
Pres Program up and down to select and change value press volume button (+/-)
Save and exit press TV button on remote control.
CROWN LCD TV CTT 3207W
Service Code.
Get in on the main menu by pressing the M button on the remote control and enter the digits four, seven, two, five.
Change the setting press the volume key and press the program up or down to select the parameters.
Crown LCD TV CTT 3207W Servcie mode
Press the menu and wait until the main menu appears on TV screen, then enter the numbers 4, 7, 2, and 5
Press Program + / - and change the value press the volume + / -
Exit factory mode press Menu button.
Crown TV 4K 2822T Servcie mode
Open your TV remote control, entering service button located
below stop button.Select press program +/- and change value press volume +/-.
Save settings and exit press P.P button.
Crown CM-2007
Open the remote, removing the top cover. Use the keys that have no access External and under "previous channel" and "Sound." Canal + / - Select the item with the VOL + / - adjusts its value. Entering or making changes in service mode menu / item information service mode by untrained persons can cause significant and permanent damage to your TV system. If you are not qualified to fix it, please DO NOT ENTER TV factory mode using these service menu codes, Call Center Service.
FUEGO TV service menu
FUEGO TV FE 21VE7
Go to main menu and press button 4, 7, 2, 5
Use red Green Blue and Yellow button to select menu
change value settings press volume up or volume down button
Store settings press OK and exit from factory mode press Menu button.
Fujitec FTC Series.
Open Fujitec TV remote controls and find the button not in use above mute button, there is a small hole in the remote casing and make holes for user access. To change value press volume button and selecting parameter press program. Save and exit the factory settings press the power button.