Vizio TV Master Unlock Passwords:
2489, 5351, 8202, 8205,
8206
XBox 360 Reset Password:
* Go to settings and click on “PARENTAL CONTROL” and instead of
entering the code; press the following
button sequence; X, Y, Left Trigger, X.
* Then you will be prompted to enter a new password.
Toshiba Master Codes:
0711, 6688 and 3308.
* Try each one until one works.
* This will reset your Toshiba TV to the original settings.
However, you will lose any information such as favorite channels, clocks, etc.
RCA
TV Parental Reset Code:
* First
select parental control from the menu. You
will be asked to enter your password.
* Press
and hold the “volume +” and “channel +” buttons on television (not the
remote) for 8 seconds.
You
will see a message that the parental controls have been unlocked.
Sharp
TV Reset Sequence:
* Start
but pressing the”menu” button on the TV. A
message should appear to input secret number.
* Press
and hold both the “VOL (+)” and the CH DOWN on the TV set until the message
disappears.
This
should reset all passwords and settings.
Sony
TV Master Code:
4357.
Use this code when prompted and it will reset the master password.
Sony
Playstation 2 & 3 Master Code:
7444.
* When
it asks for the password press select on the controller.
* Then
enter the master code and then you should be able to set a new lock code.
Dick
Smith Television Master Code:
6666.
* Go to the “Lock Menu”.
* Enter
in this default password.
Channel
Master DVR:
* Find
the receiver ID number by clicking “Menu” on the remote and then navigating
through Setup èSystem Setup è System Information.
* Now
write down the receiver ID number before the dash.
* Next,
click the “Menu” button on the remote again.
* Navigate
to Setup è Locks.
* Enter
the last 4 digits of your receiver ID before the dash.
This
will act as a temporary password.
LG
Television Master Code:
0-3-2-5.
* Go to the “Menu” board.
* Go to the “Menu” board.
* Scroll
down to “Lock”. Then enter the pass code 0325.
Phillips
TV Reset Pass code:
The
default factory code number is ”0000.”
If
this code doesn’t work it means it has been changed.
* To
reset the code go to setup and select either the channel blocking or setup
code section.
* Use
the master code of 0711. The TV
will give you an incorrect access code message.
*Press 0711 again. Now enter your new 4 digit
code.
Zenith Master Password Reset:
* Press SETUP to display the Setup menu.
* Use the remote and
enter the following 6 digit number: 210499.
* The 4 digit password should be cleared.
CHILD LOCK/UNLOCK
Panasonic DMR-ES18EE_DMR-ES18GC_DMR-ES18GCS_DMR-ES18GCA
– DVD Recorder.
> Enter service mode. Go to “special mode settings”. Facility is there to unlock the child lock. [for more details about how to enter service mode, surf this site with patience]
You can check latest error code
by transmitting [0] [1] of Remote Controller in Service Mode. Automatic Display on FL will be cancelled
when the power is turned off or AC input is turned off during self-diagnosis
display is ON.
