Tuesday, September 09, 2014

SONY LCD TV - KLV-32S530A - KLV-32S550A/L – SELF DIAGNOSIS FUNCTION

KLV-26S550A-KLV-32S530A-KLV-32S550A-KLV-32S550A/L-KLV-32S550A/T-KLV-37S550A {EX2T CHASSIS}
KLV-26S550A > GE, India, ME, Philippines, Russia, South Africa, Thailand.
KLV-32S530A > ME, Thailand.
KLV-32S550A > GE, India, Iran, ME, New Zealand,Philippines, Russia,South Africa, Thailand, Tunisia.
KLV-32S550A/L > GE, ME, Philippines, Russia, South Africa.
KLV-32S550A/T > GE, ME, Philippines, Russia, South Africa.
KLV-37S550A > GE, India, Iran, ME, Thailand, Tunisia, Philippines, Russia.
SELF DIAGNOSTIC FUNCTION
KLV-32S530A, 26, 32, 37 S550A [RM-GA016]
LED Display Specification
LED Display Control
LED Pattern.
When safety shutdown occurs, Standby LED display reports the cause by using the blinking patterns as indicated below.
Example:
The figure shows LED display when SHUT DOWN is caused by audio failure. It repeats flashing for a specified number of times in 0.3sec/cycle and has a 2 seconds interval of lighting off.
Note that a 2 seconds interval of lighting off is fixed regardless of abnormal state types.
Viewing the Service Diagnosis Display
* While TV on standby mode, press the following sequence on the Remote commander.
(if wrong key is pressed or passed 3 seconds during each process, cancel entering the self-diagnosis display.)
* To Exit, press the <I/Power> key.
KLV-32S530A, 26, 32, 37 S550A [RM-GA016]
STANDBY LED ERROR DISPLAY
Note: Each of the  blinking repeats every 2 seconds.
CLICK ON THE CHARTS TO MAGNIFY