Monday, September 08, 2014

FACTORY RESET_SOFTWARE UPDATE – DSP SCHEMATIC – JBL BD 300 - Blu-ray HTS

FACTORY RESET_SOFTWARE UPDATE – DSP SCHEMATIC – JBL BD 300
5.1-channel 3-D Blu-ray home cinema system.
FACTORY RESET
* Press "SETUP" button on remote control  ==> General Settings  ==> System ==> Restore defaults
* Select   OK ==> Press “ENTER" on remote control.
FIRMWARE UPGRADE
Upgrade from USB: 
* Copy the upgrade file
JBL_Cinema_V00.XX.bin(XX is the software version),
JBL_Cinema_MCU.bin(MCU software),
JBL_Cinema.txt (MCU MD5_File )  to USB root.
* Then insert USB ,
* start up DUT enter "set-up" into SETTINGS screen, select General Settings ==> System ==> system update ==> USB Storage.   
* When upgrade file detected, press "Enter" to upgrade.
[Once you start upgrade  don’t power off the DUT, after  upgrade DUT will restart up later a moment time or you press  button “Enter” on remote control ]
Check the version information after upgraded. 
Wake up DUT, press Enter to settings and the select system information.   you will see a interface as below: 
(Software Version: BD100(or BD300)  VXX.XX.XX MAC:XX: XX: XX: XX: XX: XX)
DSP SCHEMATIC