- Press [i] (Info) button on the remote control.
- Enter [8 > 5 > 0 > 0] by remote control.
FUNCTIONS OF BUTTONS
- "i" > Call up the Dialog Center | close down Menu.
- "P+ | P-" > Call up the Dialog Line.
- " < | >" > Call upe Menus | Changing the settings.
- "TXT" > To 'EXIT" Service Mode.'
HOTEL MODE
Maximum volume is limited and there is no access to 'Preset List" and "Setup" is activated hotel mode.
- Call up: "i" => "8500" => "P+/P-" 'Options-1" => "Right Button (>)" => "P+/P- 'Hotel'" => "< | >"'Avail'.
SPECIAL FUNCTIONS AT ACTIVATED HOTEL MODE
The maximum volume can be adjusted additionally menu item "Maxvol" in the Sound Menu.
In addition there is access to menus "Preset List" and "Channel Settings" until the set is switched Off (Standby).
Call up "I" => "Sound" => "OK" => '4658'.
DISPLAY
If no picture is visible because of a wrong panel is adjusted, can change the settings by "Blind" adjust.
The following sequence of operations must be repeated, until the picture is shown on the panel.
- Call up: "I" => "8500" => " > " => " ( P-) 4 times" " > " => "TXT" => Switch the set Off and On.
- If the picture is visible, then repeat the sequence once again and thereby adjust the correct type of panel (according to panel display label).
PROGRAMME SEARCH
- Press "I" button [Main Menu]
- Select 'Setup' with the buttons 'P+ \ P-', and confirm with button "OK".
- Select 'Auto program' with buttons 'P+ \ P-', and confirm with "OK".
- Select the required country with buttons "P+ | P-' & "< \ > ", and confirm with "OK".
- The autoprogrammes system stops at every station of acceptable reception quality; AFC and coincidence and store the station data and the respective standard automatically. The system then continues searching.
- Pressing "I" button stops the program search.
EEPROM EDIT
- This function is only for development, and is only allowed to use by special demand. Any incorrect setting may cause a defective set. Never touch it unnecessary.
