The procedures will be different to model to model.
TO ENTER SERVICE MODE
- Simultaneously Press and Hold, "Menu" & "Input" buttons on the Projector for more than [5] seconds. [OR]
- Press and Hold "Menu" button for about [20] seconds.
- The "S" will be displayed on the screen indicating that the Projector is ready to accept more commands to get into Service Mode Status.
- While "S" is being displayed, Press and Hold [Up & Dn] buttons on the projector [OR]
- Screen Button on the Remote Control, for more than [3] seconds.
- The Service Menu will be displayed.
BUTTONS AND ACTIONS
- OK => A group number increases.
- Menu => A group number decreases.
- Up => An item number increases.
- Down => An item number decreases.
- Right => An adjustment value increases.
- Left => An adjustment value decreases.
Press the Power ON/OFF button only once on the Projector or Remote control, to 'Exit" service mode.
AN OTHER WAY TO ENTER SERVICE MODE STATUS
- Press and Hold "Select" & "Input" buttons on the Projector simultaneously for about 10 seconds.
- The "Factory menu" will be displayed.
- Use [Up or Down] / [Left or Right] buttons to move through Menu items, and change the data values.
- To 'Exit" service mode, switch Off the Projector.
OR
- Press and Hold the "Menu" on the projector for about 10 seconds.
- The Service Menu will be displayed.
- Use [Up / Dn] buttons to call an item to adjust.
- Use [Left / Right] buttons to adjust the data value to selected item.
- Turn OFF the Projector, to "Exit" Service Mode.
No comments:
Post a Comment