TO ENTER SERVICE MODE
- Select CATV channel [124].
- Adjust the 'Volume to minimum' by the front panel control of the set.
- Set the "Sleep Timer" to 30 minutes.
- To switch between DAC's (B0 --> B1 ...... C0 --> C1), press 'Power'.
- To switch within the DAC, use 'Ch Up | Ch Dn buttons on the remote control.
- To change the data value to selected item, use 'Vol Up | Vol Dn buttons.
- To access the contents of the memory addresses, select DAC "S0" and press the 'Mute" button on the remote control for '3' seconds.
- Use Vol (+) | Vol ( - ) buttons to increment or decrements the address, and Volume Up | Volume Dn buttons to change the data values.
- Press [Action & Power] buttons simultaneously on the front panel of the TV for '3' seconds to 'EXIT" service mode.