SERVICE MODE
(1) Send “TEST” command by Test Commander.
Or fix the accompanying RC as follows.
(1) Select ‘TV’ by SELECTOR button.
(2) Keep pushing the yellow button on the RC during LED of
TV turning on.
(3) Remain pushed till the TV-selected LED blinking get
slower (about 10 seconds).
(4) Push “9” key five times and TV, VCR, and DVD all turns
on then off.
(5) Press ‘VIDEO I/O’ key toward the object set. (The procedure above enables RC to always
release “TEST” command.)
(To reset, follow the above procedure except (4); “0”
instead of “9”)
How to exit of ‘Service’ mode
(1) Send “TEST” command by Test Commander.
Or
(2) Select “FACTORY MODE EXIT” in ‘Service’ menu, then press
“OK” key.
POWER SCHEMATIC