SMPS SCHEMATIC
SMPS PWB_PRINT SIDE
BACK-LIGHT INVERTER_SCHEMATIC
SMPS PWB_PRINT SIDE
BACK-LIGHT INVERTER_SCHEMATIC
CLICK ON THE PICTURES TO MAGNIFY
SELF DIAGNOSIS
This monitor is equipped with a self-diagnosis function. If
there is a problem with your monitor or computer (s), the screen will go blank
and the (power) indicator will either light up green or flash orange. If the
(power) indicator is lit in orange, the computer is in power saving mode. Try
pressing any key on the keyboard or moving the mouse.
If the (power) indicator is green
1 Turn off the AC power switch and disconnect the video
signal cables from the INPUT1 and INPUT2 connectors of the media engine.
2 Press the AC power switch twice to turn the monitor off
and then on. If all four color bars
appear (white, red, green, blue), the monitor is working properly. Reconnect
the video input cables and check the condition of your computer(s).
If the color bars do not appear, there is a potential
monitor failure. Inform your authorized Sony dealer of the monitor’s condition.
If the (power) indicator is flashing orange
Press the (power) switch twice to turn the monitor off and
then on.
If the (power) indicator lights up green, the monitor is
working properly.
If the (power) indicator is still flashing, there is a
potential monitor failure. Count the number of seconds between orange flashes
of the (power) indicator and inform your authorized Sony dealer of the
monitor’s condition. Be sure to note the model name and serial number of your
monitor. Also note the make and model of your computer and graphic board.