Friday, August 29, 2014

SAMSUNG LCD-TV LE22B35*** SERVICE MODE – FACOTRY MODE - FACTORY DATA.

TO ENTER FACTORY MODE
* To enter ‘Service Mode’ Press the remote -control keys in this sequence:
* If you do not have Factory remote – control [Power OFF > INFO > MENU > MUTE > POWER ON]
HOW TO ACCESS SERVICE MODE
Using the Customer Remote
  1. Turn the power off and set to stand-by mode
  2. Press the remote buttons in this order; POWER OFF - INFO - MUTE - POWER ON to turn the set on.
  3. The set turns on and enters service mode. This may take approximately 20 seconds.
  4. Press the Power button to exit and store data in memory.
If you fail to enter service mode, repeat steps 1 and 2 above.
Initial SERVICE MODE DISPLAY State
HOW TO ENTER HIDDEN FACTORY MODE
# into the factory mode
# move the tap to Advanced
# key input : 0 + 0 + 0 + 0
** hidden menu : Advanced.
BUTTONS OPERATION WITHIN THE SERVICE MODE
* Direction Keys ▲/▼ à Item Selection by Moving the Cursor.
* Direction Keys ◄/► à Data Increase / Decrease for the Selected Item.
* Source à Cycles through the active input source that is connected to the unit.
FACTORY DATA
CLICK ON THE TABLE TO MAGNIFY