Sharp HT-SL50 Sound Bar Sub woofer - HTS – HT SL50 – How to disassemble – sub-woofer exploded view – schematic.
Output power RMS: Total 100 wattsFront Left/Right
RMS: 50W (25W + 25W) (10% T.H.D.)
RMS: 48W (24W + 24W) (1% T.H.D.)
Subwoofer:
RMS: 50W (10% T.H.D.)
RMS: 50W (1% T.H.D.)
Subwoofer
Type
Subwoofer system
16 cm (6 - 5/16") woofer
Maximum input power 100 W
Rated input power 50 W
Impedance 8 ohms
Dimensions Width: 115 mm (4 - 1/2")
Height: 422 mm (16 - 5/8")
Depth: 307 mm (12 - 1/16")
Weight 4.50 kg (9.92 lbs)
Maximum input power 100 W
Rated input power 50 W
Impedance 8 ohms
Dimensions Width: 115 mm (4 - 1/2")
Height: 422 mm (16 - 5/8")
Depth: 307 mm (12 - 1/16")
Weight 4.50 kg (9.92 lbs)
Sub-woofer - Exploded view
Soundbar speaker
Type Full Range speaker system: 2.2 x 11.5 cm (7/8" x 4-1/2")
Full Range. Maximum input power: 50 W/CH
Rated input power: 25 W/CH
Impedance 4 ohms/CH (3 pieces parallel)
Dimensions Width: 801 mm (31-1/2")
Height: 26 mm (1-1/16")
Depth: 50 mm (2")
Weight 0.66 kg (1.46 lbs.)
Exploded view
Disassembly
1. Be sure to remove the power supply plug from the wall outlet before starting to disassemble the unit.
2. Take off nylon bands or wire holders where they need to be removed when disassembling the unit. After servicing the unit, be sure to rearrange the leads where they were before disassembling.
Circuit diagram: Main and System Control
Click on the pictures to magnify
