Tuesday, May 29, 2012

HOW TO SELECT MISSED CHANNEL ON TVs



There are a number of causes for this problem.

Parential Controls: 
The channel may be blocked or is not approved in the parential control menu, if you have this feature.
Accessing parential control Menu, depends upon the TV model.

OPTION -A

  • Press "Menu" to display 'Main Menu".
  • Select the parential control menu
OPTION - B
  • Press "Menu" on your remote control to display the main Menu.
  • Select "TV Setup".
  • Select V-Chip Set.
TV/VCR mode:

If you are using VCR, the TV/VCR button could be in wrong selection.  Press TV/VCR button on the VCR to rectify this.  
Cable/Air setting:
The Cable/Air function could be in the wrong position.  There are different to correct this, depending on model.

1  Press the "Menu" button on the remote control and select the "Channel" Menu. Select the correct signal type. Antenna or Cable.

2  Select the Guide+TM, from the main menu, select Setup option, provide correct information there.

3  Check the reception:  Cable or Air in the Setup Menu.

4  Auto Channel Search:  
If channel can be accessed using the number of digit buttons on the remote control, but not the CH+/CH-- buttons, it may not be programmed in the Auto Channel Search function.  To access this:
  • Press 'Menu" button on the remote control.
  • Select the channel menu.
  • Select Auto Channel Search.
  • Do a new search, or add the channel manually.
Trouble shooting the problem using these features might be differ set to set, model to mode.  Refer the user manual to your set, for more details. A general proceedings are given above.


No comments: