Monday, September 10, 2012

XOCECO LC22HU56 SERVICE MODE - INITIALIZATION

SERVICE MODE
  • Press [INPUT > 2 > 5 > 8 > 0] in sequence by the remote control.
  • Press [CH +} or [CH -] to call an item to adjust.
  • Press "Vol Up or Vol Dn" to adjust the data value to selected item.
  • To 'EXIT' service mode, press the "Menu" button repeatedly.
INITIALIZATION
Enter Service Menu, as described above, and select "Option", "EEPROM" and "Hotel Option" sub menu adjustments of the items.  See the tables below.
                                      Sub menu Adjustment

ITEMS
PRESET
INTRODUCE

HOTEL
0
ON: HOTEL OPTION OF FACTORY MENU IS OPTIONAL.
OFF:  HOTEL OPTION OF FACTORY MENU IS NOT OPTIONAL.
LOGO
1
ON: DISPLAY LOGO IN NO SIGNAL OR TURN ON
OFF: NO LOGO DISPLAY
ADC PRESCALE
02E
SOFTWARE WILL PRESET THE DATA ACCORDING THE UNIT AND THE DATA CAN BE ADJUSTED WHEN NEEDED.
SIF PRESCALE
02E
SOFTWARE WILL PRESET THE DATA ACCORDING TO PANEL AND THE DATA CAN BE ADJUSTED WHEN NEEDED.
BACK LIGHT
FF
SOFTWARE WILL PRESET THE DATA ACCORDING THE PANEL AND DATA CAN BE ADJUSTED WHEN NEEDED.
ALL COLOR
1
1:  WHITE BALANCE OF EACH CHANNEL AUTO OFFSET BASED ON THE HDMI WHITE BALANCE.
0:  WHITE BALANCE OF EACH CHANNEL ADJUST THE OFFSET BASE SEPERATELY.
EEPROM MEMORY RECALL
>
EEPROM INITILIAZATION
IF AFT ADJUSTMENT
Enter service menu and set IF VCO to [1]., or press "Input > 2 > 5 > 8 > 1" to enter VCO adjust mode, adjust L109 to value 2.5V of TP105, then set IF VCO to [0].