Friday, March 21, 2014

SANYO DP 23845 - SERVICE MODE - DISASSEMBLY


STAND REMOVAL
Remove 4 screws to take the stand off.
Cabinet back removal

Remove 8 screws [B: 4x14] to take the cabinet back [C/B] off.  (The cabinet back can be removed without removing the stand.
CABINET BOTTOM REMOVAL
Press 2 hooks inside to remove the cabinet bottom (C/BTM)
SHIELD BACK AND MOUNTING BRACKET REMVAL
Remove 6 screws [C: 3x10] to remove the shield back (SH/B)
REMOVE A SCREW [D: 3x10] to remove the mounting bracket (M/BRKT)
SERVICE MODE
While pressing the Volume (-) button on the TV, press the Number Key 1 on the remote control unit.  The service menu will now appear.
SERVICE ADJUSTMENTS
Press UP or DN key to select the desired service menu item. 
NOTE: Press the Mute key to skip up 16 items.
Use the + or – key or number keys to adjust the data.  The + or – keys will increase or decrease the data sequentially.  The number keys[0~7] toggle only their respective bits between 1 and 0 and are used to change the Sub-Addresses.  For example, to change bit 5 press the number 5 key.
NOTE:  using the + or – is not recommended due to possible rapid changes.
To Exit service mode; press the Menu key.