Service Menu is entered by pressing 9, 3, 0, 1 keys on the
remote controller when the Picture icon is highlighted in the Main Menu.
Service Menu has 3 sub-menus. These are:
* Options
* Adjustments
* Selections.
Pressing OK button can do navigation through these menus.
Every adjustment made in this menu is saved automatically.
OPTIONS
Options are adjustments that the user can select On or Off.
BG
DK
I
LL’
SCART 2
FAV
SVHS
HOTEL MODE
STAND BY
MSP CARRIER MUTE
WSS SCART
FIRST ATS
BG / DK / I / L
Enabling or disabling these options will remove / add these
standards to Manual Install menu, SYSTEM item.
SCART 2 / FAV / SVHS
If a source is disabled in the Service Menu, it will be
skipped during source switches. If SCART2 is enabled, SW assumes that the FAV
source share the same path as the SVHS source on the HW. If it is disabled, it
is assumed that FAV and SVHS share separate paths. TUNER and SCART1 are enabled
by default.
HOTEL MODE
Enabling Hotel Mode has two effects. First, SETUP menu is no
longer accessible by the user. Second, maximum adjustable volume value is
limited to HOTEL VOLUME value. This value can be adjusted in the ADJUSTMENTS
sub-menu of the Service Menu.
STAND BY
If this Option is OFF, the TV will stay in Stand By mode
after a Power On. If this Option is ON, the TV will recall its last stand by
status before the Power Off, and switch on from Stand By automatically, if the
last state was ‘Stand by On’.
MSP CARRIER MUTE
If this option is ON, sound processor’s carrier mute
functionality will be enabled. The MSP will mute the sound automatically if the
signal quality is bad. Setting this option Off will disable this functionality.
WSS RF / WSS SCART
Automatic picture format switching for WSS and Pin8 can be
enabled or disabled through this option. If WSS SCART is set to OFF, AUTO
picture format mode will be disabled for SCART1 and SCART2 modes. Pin8 source
switching will still be operational, but no picture format changes from Pin8
voltage level will be ignored.
ATS
If this option is set to ON, TV will display Country
Selection menu in the next start. After some country is selected, the user will
be prompted for the start of Auto Programming process.
ADJUSTMENTS
This sub-menu contains numeric adjustments. These items are:
WHITE R
WHITE G
WHITE B
PRESCALE FM
PRESCALE NICAM
PRESCALE SCART
HOTEL VOLUME
WHITE R / WHITE G / WHITE B
These are used for color bias adjustment. Unlike other items
in the service menu, changes will take effect immediately.
PRESCALE FM / PRESCALENICAM / PRESCALE SCART
These are prescale values that will be used for the
initialization of the sound processor (MSP), at the next switch on.
HOTEL VOLUME
This value is used as the volume limit, when the Hotel Mode
is on.
SELECTIONS
This sub-menu contains selections.
TUNER TYPE SAMSUNG /
PHILIPS
TELETEXT NO TEXT /
FAST / FAST&TOP
MSP CLIP REDUCE VOL
/ REDUCE TONE / COMPROMISE / DYNAMIC
TUNER TYPE
One of two-supported tuner can be selected from this item.
System must be restarted for this change to take effect.
TELETEXT
NO TEXT: Teletext is totally disabled. TXT/MIX button will
not be functional. AUTO picture format mode will be disabled in RF, F-AV and
SHVS modes. Naming and sorting functionality during Auto programming will be
disabled.
FAST: TO Ptext functionality will be disabled.
FAST&TOP: TO Ptext functionality is enabled.
TIMER MODE
If OFF TIMER is selected, the user will be able to enter
time of the day info for the TV to switch off. If
SLEEP TIMER is selected, the user can specify some time
period, after which the TV will go to stand by automatically.
MSP CLIP
This selection identifies which method will be used by the
sound processor to prevent clipping effects on volume.
AUTOPROGRAMMING
When the user selects the Auto program item in Setup menu,
Country Selection menu is opened. The user must select a country before the
Auto programming starts. Broadcast system will be selected according to the
country selected.
Broadcast systems according to countries:
BELGIUM BG + L
CROATIA BG
CZECH REP. DK
DENMARK BG
FINLAND BG
FRANCE L + BG
GERMANY BG
GREECE BG
HUNGARY DK
IRELAND I
ITALY BG
NETHERLANDS BG
NORWAY BG
POLAND DK
PORTUGAL BG
SPAIN BG
SWEDEN BG
SWITZERLAND BG + L
TURKEY BG
UNITED KINGDOM I
For countries France, Belgium and Switzerland, auto
programming is done twice. For Belgium and Switzerland, first BG channels will
be searched, after the search in BG is done, searching will restart for L
standard. If the selected country is France, the sequence of standards
isreversed, thus, first L then BG.
TELETEXT LANGUAGES
L5A SW decides which teletext language group will be used
for teletext decoding, according to the country selected for
autoprogramming.Teletext languages according to countries:
EAST EUROPE: CROATIA ,CZECH_REP, POLAND
WEST EUROPE: BELGIUM ,DENMARK, FINLAND, UK, FRANCE, GERMANY,
IRELAND ,ITALY ,NETHERLANDS, NORWAY, PORTUGAL,SPAIN, SWEDEN, SWITZERLAND,
HUNGARY TURKISH-GREEK:GREECE TURKEY
PC MODE
Pressing PC button on the remote controller can enter PC
mode. User can return back to TV mode by pressing the PC or TV buttons.
After the switching to PC mode, VGA input will be displayed
on screen, as soon as the mode (input resolution and frequency) is determined.
If there is no input from the VGA input, NO SIGNAL dialog
will be displayed for 15 seconds. At the end of this period if there is no
signal from VGA input, the TVwill go to Sleep State. While in the sleep state,
the TV will keep monitoring the VGA input. If VGA signal is detected, the TV
will wake from Sleep State, to PC
mode. Alternatively, the user may select to switch the TV on
from Sleep State, just like switching on from Stand-by. In this case, the set
will switch on from TV mode.
