SERVICE MODE & Language Selection_ CANON PRINTER NP6035 – NP6028 – NP6230
SERVICE MODE
To select
the language, you have to enter its service mode option.
The
NP6035’s service mode is classified into the following six: Under each of the
modes are items.
Using the Service Mode.
Open
the front door, and insert the door switch actuator. If you want to make checks
under I/O display mode while making copies, set the appropriate copying mode.
* Open the front
door, and insert the door switch actuator. If you want to make checks under I/O
display mode while making copies, set the appropriate copying mode. Press the
service mode switch (SW3) with a hex key.
* Press the service mode switch [SW3] with a hex key.
* Press the service mode switch [SW3] with a hex key.
* The
copier will indicate “ $ ” in the upper left corner of the message display when
it has started the service mode.
* Press
the “ * “ key twice. The copier will
show the service initial screen.
* Select
the appropriate mode on the screen.
* Using
the ►►/◄◄ key, select the appropriate screen.
* Make the
appropriate check or adjustment.
To end the
service mode:
> Press the
reset key [ // ] once to leave the current mode.
> Press the reset
key once again to end the service mode.
The copier
ends service mode when you turn off the power switch or disconnected the power
plug. However, opening the front door,
right door, delivery door, pedestal right door or pedestal left door will not
end the service mode.
Service mode key position
Using Adjustment Mode and Options Mode
Using adjustment mode or options mode, you can store the settings
made on the control panel in the RAM on the DC controller, thereby simulating
the functions of the conventional VRs and SWs.
Each machine is adjusted at the factory, and the effective
adjustment values are recorded on the label.
If you have replaced the DC controller PCB or initialized the RAM,
you must enter the values recorded on the label and the drum label attached to
the front of the drum unit. Further, you must always record any values you
entered newly in the field.
LANGUAGE SELECTION
Control Display Mode (* 1 *): Using the ►►/◄◄ key, select the following screens.
CLICK ON THE PICTURES TO ZOOM IN