How to enter Service Mode & White Balance adjustment _ Schneider 26M911 TFT-LCD TV
SERVICE MODE
SERVICE MODE
When the EEPROM has been replaced, the SVC data should be restored
as the function of individual system and specification
To Enter and exit SVC mode
Note: Into the SVC mode, Initialize with default data.
Note: Into the SVC mode, Initialize with default data.
* Press 5
Seconds MENU buttons on both TV set and Remote Controller at the same time to
get into SVC mode.
* Press
the PR ▲▼ button several times to find SVC Data.
* Input
the corresponding SVC data referring to Table below with the VOL ◀▶ key.
* Press TV/AV button to exit SVC mode.
Factory outgoing setting & Initialize with
default data (into the SVC mode). Do not
change the “( )” items.
WHITE BALANCE CHECKING
CLICK ON THE PICTURES TO MAGNIFY