SONY SUPER AUDIO CD PLAYER_SCD-XE597 - AEP & UK Model _ HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH
TURNS OFF
HOW TO DISASSEMBLE THE CD MECHANISM,
CD Mechanism Type - CDM66D-DVBU50
Optical Pick-up Name - DBU-3
HOW TO OPEN THE DISC TRAY WHEN POWER SWITCH
TURNS OFF
* Insert a tapering driver into the aperture of the unit bottom, and
turn in the direction of arrow.
* Use a flat (-) head screwdriver to open the disc tray by manual operation. (Flat head screwdriver with nominal blade length of 3mm.)
* To close the disc table, turn the driver in the reverse direction.
* Use a flat (-) head screwdriver to open the disc tray by manual operation. (Flat head screwdriver with nominal blade length of 3mm.)
* To close the disc table, turn the driver in the reverse direction.
HOW TO DISASSEMBLE THE CD MECHANISM
MAIN BOARD, LOADING PANEL, FRONT PANEL & KEYBOARD-DISPLAY
BOARD
TEST MODE
Setting Method of Test Mode
* Press three buttons ◄◄, [PUSH ENTER] and [POWER] simultaneously, The test mode becomes active. Then all segments of the fluorescent indicator tube are turned on.
* Press three buttons ◄◄, [PUSH ENTER] and [POWER] simultaneously, The test mode becomes active. Then all segments of the fluorescent indicator tube are turned on.
FL Tube Grid, Segments Check
* Grid of all segments lights up sequentially starting from 1G to 16G.
* The vertical line (total 5 lines) of all grids lights up sequentially in the range of 5G to 16 G starting from the left.
* The horizontal line of (total 7 lines) of all grids lights up sequentially in the range of 5G to 16G starting from the top.
* Grid of all segments lights up sequentially starting from 1G to 16G.
* The vertical line (total 5 lines) of all grids lights up sequentially in the range of 5G to 16 G starting from the left.
* The horizontal line of (total 7 lines) of all grids lights up sequentially in the range of 5G to 16G starting from the top.
Sircs Receive Check
* The message “SIRCS CHECK” is displayed on the fluorescent indicator tube.
* With the machine in the status that is set in step 2, press any on the remote commander. The machine enters the key check standby state. (When the ► key or the Stop key is pressed, the reception check is canceled.)
* The message “SIRCS CHECK” is displayed on the fluorescent indicator tube.
* With the machine in the status that is set in step 2, press any on the remote commander. The machine enters the key check standby state. (When the ► key or the Stop key is pressed, the reception check is canceled.)
Key Check
* In the key check mode, the fluorescent indicator displays “KEY CHECK**”. Each time a button is pressed, “**” value. However, once a button is pressed, it is no longer taken into account.
* In the key check mode, the fluorescent indicator displays “KEY CHECK**”. Each time a button is pressed, “**” value. However, once a button is pressed, it is no longer taken into account.
* To exit from this mode, the message “JOG CHECK” is displayed.
Jog Check
1. After the key check is completed, turn JOG clockwise to turn on the calendar segments sequentially. When the segment “15” is confirmed, turn JOG counter-clockwise that turns off the calendar segment. When the segment “1” is confirmed, this is the end of check.
1. After the key check is completed, turn JOG clockwise to turn on the calendar segments sequentially. When the segment “15” is confirmed, turn JOG counter-clockwise that turns off the calendar segment. When the segment “1” is confirmed, this is the end of check.
Releasing Meted of Test Mode
* After all the checks are completed, confirm to see that the display “TEST-END” appears. The message indicates that the check is ended normally.
* Press the [POWER] button to turn off the main power and disconnect the power plug from the wall outlet.
* After all the checks are completed, confirm to see that the display “TEST-END” appears. The message indicates that the check is ended normally.
* Press the [POWER] button to turn off the main power and disconnect the power plug from the wall outlet.
