Monday, February 02, 2015

SHARP 21S-FX - HOW TO ENTER SERVICE MODE - DEFAULT DATA VALUES

How to enter service mode to SHARP 21S-FX10L CTV _ default data values chart.
SERVICE MODE
* Service mode can be switched by ‘Service” key + Ch Up + Vol Dn when reset.
* Service mode is cancelled by “Service” key during service mode.
* Service mode can be switched to the following 5 modes via Menu key.
* During service mode, AFT operation is prohibited.  The setting data for PLL is always set to factory data.  * During service mode the following user data are set to default value and stored as last memory,
Picture, tint, color, bright, sharp, color termp, bass, treble, balance, MTS, FAO, speaker, energy save.
* During service mode, OSD display for ON/Off is logged via “Ch Call” key.  At display Off condition, if changing the adjustment data, channel, input source, it remains display Off.  At display Off condition, if changing adjustment item, it returns to display On.
* During service mode, these  operation are prohibited. Closed Caption/No signal Blue Screen.

* During service mode, sound is muted [Only MTSIC]; except when selecting these items. V24, M01.
ADJUSTMENT MODE ITEMS AND FACTORY SET [DEFAULT] VALUES
CLICK ON THE PICTURES TO MAGNIFY