Firmware upgrade for CPU
FIRMWARE UPDATE PROCEDURE
There is an application software to upgrade the firmware of CPU. Bootcode of CPU should be embedded into CPU
in production line before you use those application (.exe) file.
Flashupgrader.exe => for Win95, 98 & ME
FlashupgraderNT.exe => for Win2000, NT & Win XP.
CPU software=>Flashupgrader.exe or FlashupgraderNT.exe
I2C & RS232 Alignment KITs(3138 106 10198)
RS232 cable(9pins to 9pins) as below.
Flashupgrader.exe => for Win95, 98 & ME
FlashupgraderNT.exe => for Win2000, NT & Win XP.
CPU software=>Flashupgrader.exe or FlashupgraderNT.exe
I2C & RS232 Alignment KITs(3138 106 10198)
RS232 cable(9pins to 9pins) as below.
1 > Connection for Firmware upload.
Do not connect Mains cord to Monitor at this moment.
Do not connect Mains cord to Monitor at this moment.
Factory mode Adjustment
Entering factory mode as Press and button simultaneously and
power ON as Fig.
Use UP/DN buttons to Factory Mode to enter by Menu then appear.
SEE CODE VERSION
Check Firmware version
CODE VERSION. 0.22 2003-07-29
CONFIG VERSION. 0.22 2003-07-29
OSD VERSION. 0.22 2003-07-29
CODE VERSION. 0.22 2003-07-29
CONFIG VERSION. 0.22 2003-07-29
OSD VERSION. 0.22 2003-07-29
The updated firmware of CPU
Configdata.hex 2. Flasher.hex 3. Gui.hex 4. romcode.hex
Execution files
Make sure FlashUpgrader or FlashUpgraderNT is placed in the same
directory with *.hex files and pwSDK.ini
There two versions of FlashUpgraders for different Windows operating systems.
There two versions of FlashUpgraders for different Windows operating systems.
Flashupgrader.exe => for Win95, 98 & ME
FlashupgraderNT.exe => for Win2000, NT &Win XP.
Remove the AC power cable
After double clicking the FlashUpgrader icon, you will see this window.
Make sure you choose the path of the files.
You will see the next screen.
You will see the next screen.
Then click Flash.
FlashUpgrader is waiting for the AC reset signal.
Make sure the I2C & RS232 switch (the circled button at the right hand side of the following photo) of the communication box is held down, the orange and the red LEDs light on while the other green LED is off.
Make sure the I2C & RS232 switch (the circled button at the right hand side of the following photo) of the communication box is held down, the orange and the red LEDs light on while the other green LED is off.
Connect the box to the serial port of your PC via RS232 cable
and to the monitor via D-SUB cable.
Press the power and the menu key of the monitor at the same time.
Hold the two function keys and connect the AC cable. The download progress should automatically
start. When you see a running progress bar, you can release the two function keys.
When the download progress is completed the monitor will
automatically reset and you can confirm the version number in the service
menu.
[If the download does not start, resetting the power of the communication
box or restarting Windows may solve the problem.]
