LED BLINKING CODES - HOTEL MODE DETAILS - SELF CHECK MODE - PANASONIC TH-L32C8K MALAYSIA
Power LED Blinking Timing
When an abnormality occurs, the protection circuit will operate and reset the unit to standby mode. During this time, the defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow
When an abnormality occurs, the protection circuit will operate and reset the unit to standby mode. During this time, the defective block can be identified by the number of blinking times of the Power LED on the front panel of the unit as follow
Self Check Mode
Press the “MENU” button (on the remote control) and the “DOWN” button on the LCD panel.
Press ON/OFF button on the panel to Exit.
Press the “MENU” button (on the remote control) and the “DOWN” button on the LCD panel.
Press ON/OFF button on the panel to Exit.
Hotel Mode Adjustment
Press the “VOLUME DOWN” button on the TV panel and simultaneously press the AV button on the remote control 3 times to enter Hotel Mode.
Set Hotel mode “on/off”, then press “EXIT” to come out.
Press the “VOLUME DOWN” button on the TV panel and simultaneously press the AV button on the remote control 3 times to enter Hotel Mode.
Set Hotel mode “on/off”, then press “EXIT” to come out.
Hotel Mode
Purpose
Restrict a function for hotels.
Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu, enter the following command (within 2 second).
[TV] : Hold Vol [Down] + [Remote] : Press AV button 3 times. Then, the Hotel mode set-up menu is displayed.
Purpose
Restrict a function for hotels.
Access command to the Hotel mode setup menu.
In order to display the Hotel mode setup menu, enter the following command (within 2 second).
[TV] : Hold Vol [Down] + [Remote] : Press AV button 3 times. Then, the Hotel mode set-up menu is displayed.
