Tuesday, February 02, 2016

AOC203P - 20 inch MONITOR - SMPS Circuit Diagram

Used semiconductors: TL1541ACNSR – SG6841 – ST9NK60ZF(FET)
SMPS Circuit Diagram
SMPS PWB - Solder side
Adjusting the Monitor's Display
1 Press the MENU-button to activate the OSD window.
2 Press or to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it. If the function selected has a sub-menu, press or again to navigate through  the sub-menu functions. Once the desired function is highlighted, press MENU-button to activate it.
3 Press or to change the settings of the selected function.
4 To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-3.
MENU / ENTER
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON or Exit OSD menu when in Volume Adjust OSD status.
Auto Adjust button / Exit:
1 When OSD menu is in active status, this button will act as EXIT-KEY (EXIT OSD menu).
2 When OSD menu is in off status, press this button for 2 seconds to activate the Auto Adjustment function.  The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
OSD Lock Function
 To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.