Model Numbers: B14CWII - B14R - B39F - B51F - B51NX - B59F - C14C - C39F - C49F - C51F - C51N - C51ND - 59SL2 - 68SL2
There are four methods to re-tune these sets.Method - 1
> Press TV Tuning YELLOW on the remote control handset. The TV Tuning menu will appear on the screen with CH highlighted.
> With CH highlighted, use the numeric buttons to enter the UHF channel number if known. If not know, press TV Tuning YELLOW repeatedly until * is highlighted then press + or - on the remote control handset to start searching up or down. The search will stop when a signal is found.
> Press TV Tuning YELLOW on the remote control handset to move the cursor.
> Press TV Tuning YELLOW on the remote control handset to move the cursor to PROGRAM
> Using the numeric buttons, input the program position to store the channel, the cursor and + will flash
> Press +> to store
> Press TV to exit
Method - 2
> Press TV
Tuning YELLOW on the remote control handset. The tuner menu will
appear on the screen.
> Press + three
times
> Press TV
Tuning YELLOW repeatedly to highlight SEARCH if the UHF channel
numbers are not known, then press + or - to search up or down for a signal.
> If the UHF
channel numbers are known, press TV Tuning YELLOW repeatedly to
highlight CHANNEL, then using the numeric buttons, enter the two digit
UHF channel number
> Press TV
Tuning YELLOW to highlight PROGRAM, then using the numeric
buttons input the program position to be stored.
> Press TV
Tuning YELLOW twice to highlight STORE
> Press +
to store.
> Press TV to exit.
Method - 3
> Press TV
Tuning YELLOW on the remote control handset. The tuner menu will
appear on the screen.
> Press + three
times.
> Press TV
Tuning YELLOW repeatedly to highlight SEARCH if the UHF channel
numbers are not known, then press + or - to search up or down for a signal.
> If the UHF
channel numbers are known, press TV Tuning YELLOW repeatedly to
highlight CHANNEL, then using the numeric buttons, enter the two digit
UHF channel number
> Press TV
Tuning YELLOW to highlight PROGRAM, then using the numeric
buttons input the program position to be stored
> Press TV
Tuning YELLOW twice to highlight STORE
> Press +
to store.
> Press TV to exit.
Method - 4
> Press TV Tuning YELLOW on the remote control handset. The TV Tuning menu will appear on the screen.
> Press TV Tuning YELLOW on the remote control handset to move the cursor.
> Press + or - to start
searching up or down, or enter the UHF channel number if known.
> Press TV Tuning YELLOW on the remote control handset to move the cursor to PROGRAM
> Using the numeric buttons,
input the program position to store the channel, the cursor and + will flash
> Press +, the program
position is now stored
> Press TV to exit.
