NORCENT LT-2722 - POWER SUPPLY SCHEMATIC [CIRCUIT DIAGRAM] - Password Reset - Factory Mode [Service Mode] - Universal Remote Control Set-up Codes

MAIN POWER SMPS SCHEMATIC

SUB-POWER SCHEMATIC

{CLICK ON PICTURES TO ZOOM IN}

COMPONENT SIDE

FOIL SIDE

PASSWORD RESET

Change the password (default is ‘1111”).

Follow the instructions on the screen. Once changed, please remember your own password. If you have forgotten your password, please do the following:

• “POWER (OFF) = MENU => V-CHIP => MUTE” to revert to the default password of 1111.

FACTORY MODE

• Press Number key 100 => 9 => 9 => 1 into Engineer Mode.
• Press menu key repeat to “ADC “page, then select “EPinit” and press “right” key to initial EEPROM.
• Press Number key 100 => 9=> 9 => 9 into the Factory Mode.

Turn the POWER-button off to on to quit from factory mode.

Universal Remote Control Set-up Codes

GE : 0216 0043 0056 1027 [043, 216]

RCA RCR 311W: 1203 1207, 1222

RCA RCR 312W: 10748, 10824 11610, 11144, 11240, 11331