- Disconnect the monitor from the power source before disassembly.
- Follow these directions carefully; never use metal instruments to pry apart the cabinet.
- R/Cover opening jig : BH81-00001A.
- Place LCD TV face down on cushioned table. Remove 10 screws from the rear cover.
- Remove 4 screws from grip on the stand. and remove the stand.
- Remove 3 screws from the Jack-cover.
Remove screws from the Shield-cover and disconnect cables.
Remove screws from the boards and lift up the boards.
Remove
2 screws from the side-jack and remove screws from the BRKT.
Remove 4 screws from the side-BRKT.
Reassembly procedures are in the reverse order of disassembly
procedures, place the lamp wire correctly in the locator groove so that the
wire will not bind or interfere with rear cover.
