Saturday, October 31, 2015

HOW TO ENTER SERVICE MODE - Beko K5 CHASSIS-DVD COMBO TV

Service Mode – Adjustments – Factory Default Data values – Beko TV-DVD Combo
SERVICE MODE
To enter the Service Mode, ‘Service In/Out” button on the Service Remote Control.
Or 
Activate the “Picture Menu” with the user remote control and press “9301” (Press “0” button to exit the Service Mode).
To exit from the service menu, TV/TX button should be typed on the Remote Control.
While the service menu is on screen, version and the date of the software are written on right bottom of the screen.
AGC Adjustment
Switch to Service Menu
Find the “AGC METHOD” under “OPTIONS” sub-menu with P+/P-,
Set its value to “SYNC+PEAK WHITE”.
Find “AGC” under “IF ADJ.” sub-menu with P+/P-,
Set its value to “4”
Find “AGC FOR VHF I” under “IF ADJ.” sub-menu with P+/P-,
Set its value to “4”
Set “PIP AGC” topic‘s value to “15”
Set “PIP AGC FOR VHF I” topic‘s value to “20”
Exit from the service menu.
Supply Voltage Adjustment
Connect a digital voltmeter to the cathode of diode D610 at the AV mode of the TV and set the screen voltage to the minimum with the screen potentiometer. Adjust the main supply voltage (B+) with P601 potentiometer to the following value (after supply adjustment, readjust Screen and focus voltage).
21” : 122 VDC (for A51QDX993X030)
Screen Adjustment
Switch the TV to the AV mode
Do not make any connection from the scart switch
Switch on the service menu
Set the value of “BLUE-BLACK” option to “OFF”
Set the value of the “SCREEN ADJ.” to the indicated value in FACTORY SETTINGS TABLE
Press “OK” button on the RC
There should appear a horizontal line on the centre of the set
Adjust the screen potentiometer to set the line at the first seen point.
Exit from the service menu.
White Balance Adjustment
Apply a white pattern with a pattern generator to the antenna input.
Enter the Service Menu and access to VIDEO ADJ. I sub-menu
Set the value of “G.CUT OFF” value to “156” and “G.DRIVE” value to “356”.
Adjust red drive with“R.DRIVE” and blue drive with “B.DRIVE” .
Adjust red cut off with “R.CUT OFF” and blue cut off with “B. CUT OFF”
If white balance cannot be adjusted properly, slightly change the values of “G.CUT OFF” and “G.DRIVE”.
Exit from Service menu.
Geometry Adjustments
Apply the cross hatch pattern with a pattern generator to the antenna input.
Enter Service Menu and access to GEOMETRY sub-menu
The options, “50Hz GEOM.”, “50Hz. GEOM.HOR.II”, “50Hz GEOM.EHT” are for PAL/SECAM.
The options, “60Hz GEOM.”, “60Hz. GEOM.HOR.II”, “60Hz GEOM.EHT” are for NTSC.
Adjust Vertical Amplitude with “VERTICAL AMPLITUDE” option.
Adjust vertical centering with “VERTICAL SHIFT”, vertical linearity with “LINEARITY” , vertical s-correction with “S-CORRECTION”, vertical parallelogram with “VERTICAL ANGLE”, vertical bow with “VERTICAL BOW”, horizontal centering with “HORIZONTAL SHIFT”, trapeze adjustment with “TRAPEEZE CORR.I”, general parabola adjustment with “CUSHION CORR.I” options.
Adjust the parabola of the top corners with “UPPER CORNER 1” and “UPPER CORNER 2”.
Adjust the parabola of the bottom corners with “LOWER CORNER 1” and “LOWER CORNER 2”.
Adjust the horizontal OSD centering with “HORIZONTAL OSD POSITION” and vertical OSD centering with “VERTICAL OSD POSITION”
For NTSC adjustments, connect an NTSC signal from AV1 follow the adjustments explained above under the sub-menus “60Hz GEOM.”, “60Hz. GEOM.HOR.II”, “60Hz GEOM.EHT”.
Exit from the Service Menu.
Options Menu
Enter the Service Menu with the Service RC and and access to OPTION sub-menu and the options and their details are:
AV1YUV : AVAILABLE(Component input is available from Scart 1); N/A(Not Available)
AV2&AV3 : AV2&AV3 N/A (Not Available); AV2 AVAIL.-AV3 N/A (AV1 Available, AV2 Not Av.);
AV2&AV3 AVAILABLE ( Both Available)
AV4 : NONE(No Front AV); CVBS+SVHS(Both Available); CVBS ONLY(Front AV Available); SVHS ONLY(SVHS available)
TELETEXT : DEFAULT(Teletext); FASTEXT; TOPTEXT; FASTEXT+TOPTEXT
LANGUAGE : 1 (English, French, German, Italian, Spanish, Portuguese, Dutch, Greek, Danish, Swedish, Finnish, Norwegian, Turkish, Hebrew, Russian, Hungarian, Slovak, Czech, Polish, Albanian, Macedonian, Serbian, Slovenian, Romanian, Croatia, Bulgarian); 2 (English, French, German, Italian, Dutch, Greek, Danish, Swedish, Spanish, Portuguese, Norwegian, Finnish, Albanian, Macedonian, Turkish, Russian, Hebrew, Hungarian, Croatia, Romanian, Bulgarian, Slovenian, Czech, Slovak, Arabic, Persian)
TXT TABLE : AUTO; WEST(English, French, German, Turkish, Spanish, Italian, Finnish, Swedish, Norwegian, Danish); EAST(Polish, French, Hungarian, Czech, German, Slovenian, Italian, Romanian); GREEC(English, French, Turkish, German, Finnish, Norwegian, Swedish, Danish, Spanish, Italian, Greek); CYRILLIC(English, Russian, German, Czech, Estonian, Ukrainian, Latvian); ARABIC(English,
French, German, Turkish, Spanish, Italian, Finnish, Swedish, Norwegian, Danish, Arabic); FARSI(English, French, German, Turkish, Spanish, Italian, Finnish, Swedish, Norwegian, Danish, Persian); HEBREW(English, French, German, Turkish, Italian, Finnish, Swedish; Norwegian,Danish)
CRT : 4:3; 16:9
PIP : AVAILABLE; N/A
MAIN TUNER : Philips; Panasonic DB2G3-DA5G3; Temic; Panasonic D44G3; Sharp or Alps
PIP TUNER : Philips; Panasonic DB2G3-DA5G3; Temic; Panasonic D44G3; Sharp or Alps
SVM&DCI : ON; OFF; MENU
BLUEBLACK : ON(blue-black activated), OFF(Blue-black inactivated)
LTI&COMB : ON; OFF
CTI :ON(Color Transition Improvement available); OFF(N/A)
ADAPTIVE PKG : ON(Digital Noise Reduction available); OFF(N/A); MENU(via menu)
PROTECTION : N/A(No Protection circuit); BCL ONLY(Only Beam Current Limiting available); VERTICAL ONLY( Only Vertical protection available); BCL&VERTICAL(Both available)
PANORAMA : AVAILABLE; N/A
KEYBOARD : P-P+V-V+; MENU P/V-+
GAME : AVAILABLE; N/A
ALARM TIMER : AVAILABLE; N/A
DVD LANG : A; B; C; D
DEMO : 0(auto program in first start, closed); 1(open)
Sound Options Menu
BG : EUROPE(BG Europe); NEW ZELLAND(BG New Zealand); AUSTRALIA(BG Australia); N/A(BG not available)
DK : AVAILABLE; N/A
I : AVAILABLE; N/A
L/L’ : AVAILABLE; N/A
FM RADIO / TV GUIDE : NONE(Radio & EPG, not available); FM RADIO(Only radio available); TV GUIDE(Only TV Guide available)
NICAM : AVAILABLE; N/A
DOLBY VITUAL : AVAILABLE; N/A
BASS OPTION : DYNAMIC BASS(Dynamic Bass available); SUBWOOFER(Subwoofer available); NONE
HEADPHONE : AVAILABLE; N/A
CARRIER MUTE : VIA MSP; VIA MICRO
PAT : AVAILABLE(Picture and Text available); N/A
SIMPLE HOTEL : AVAILABLE; N/A
HOTEL MAX
VOL : Limits the max volume level in hotel mode
AGC METHOD : SYNC PEAK WHITE; FIXED
TILT : N/A; AVAILABLE
CRT 4:3,
MODE 16:9 : VIA FLYBL(Prevents cut off line to be seen by shifting up); DISABLE CUTOFF( Directly Prevents Cut off line to be seen)
Hotel Mode
If “Simple Hotel” option in the Service Menu is selected as “ON”, to access set up menu “4658” should be typed whilst the “Features Menu” is on screen. After finishing the adjustments by taking the TV to Standby or shutting down, the access can be re-inhibited.
Factory Settings for Service Mode