To open FFC Holder
BDP 6G (BDP-S380) series component structure is as same as conventional DVD Players. However BD player requires precise read out functions and also secures contents Protection system. Since above requirement, it is necessary to set/adjust BU data to EEPROM.
The following cases need Adjustments;
- Replace BU (MB is original)
- Replace MB (BU is original)
- Replace both BU and MB
Digital camera (recommend with macro mode)
Barcode decoder (BDPRdec_ver2.0) installed in JIG PC’s
USB memory
ESD workbench.
Procedure (all cases)
CLICK ON PICTURES TO ZOOM
BU DATA DECODE JIG
JIG Name: BDPRdec. Exe
Release 2010.11.26
Version : 2.0.0.0
Software Contents:
BDPRdec.exe ; Software
SavePath.ini ; decoded file destination setting file
(initial destination is C:¥BuData.txt)
Tasman.Bars.dll ; decode dll
Uninst.exe ; unistall BDPRd ec.exe from PC
Installations
- Unzip files to any PC Folder
- Check the attached 2D code photo(OK_sample.JPG) drag-and-drop onto BDPRdec.exe, the Password will be required at first time only, no need P/W from second time.
- If there is the error message (.NET frame work requirements) please apply Microsoft .NET Framework 2.0 (or 2.0 SP1) from Microsoft download site.
Drag-and-drop 2Dcode photo onto BDPRdec.exe
Case -2
Drag-and-drop BU data file onto BDPRdec.exe
Data file name be changed to specify format and end of 7
character are defined
Player : ****BDP.txt
Recoder: ****BRD.txt
Can also enter the file path at the prompt.
LOADING FOR SERVICE
BDP 6G Loading Ass’y service parts consists from 3 parts.
- Holder, Clamper Assy
- Loading Assy
- Holder FFC
“Loading for service” A-1750-926-A
LASER CAUTION LABEL
The Loading Ass’y service parts does not have Laser Caution
Label. So that reuse the original Laser
Caution label and paste it on top of new Loading Ass’y.
In case of BU assy replacement:
- OP related data for new assy is controlled by BU factory
- All of data is recorded into a barcode label
- The label is put on the assy
- Service parts will be followed
- In service, the data should be read out from problem assy
- The read data should be saved to new assy
The label is “DATA MATRIX” format
The number of data is 91 words
The method of reading and saving is required when BU and main
board are replaced.
All of BU data on the barcode label is shot by digital
camera in order to make a JPEG file of BU data.
Application software in the PC makes digital data from JPEG
file.
The converted data is stored to USB memory.
The USB memory is connected to BDP 6G unit.
In service mode, there is a command to save the data from
USB memory to board memory.
The application software will be a service jig .service jig,
and the recording media will be CD-R.
- Shoot the barcode Format is JPEG
- Application Software Data convert from JPEG à TEXT
- Save the TEXT data.
- USB device is connected on the rear unit, and the TEXT data as new data is loaded to unit by service mode.
When instruction to PC, password is required.
The password will be supplied to only service HQ, and
service center name, q’ty and all of software-registered information should be aintained
by service HQ, and Video will ask to report the registration information.
