A lamp has finite product life. Using the lamp for long
periods of time could cause the pictures darker or the color tone poor. Note
that each lamp has a different lifetime, and some may burst or burn out soon
after you start using them. Preparation of a new lamp and early replacement are
recommended.
- Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes.
- Prepare a new lamp.
- Loosen the screw (marked by arrow) of the lamp cover and then slide and lift the lamp cover to the side to remove it.
- Loosen the 2 screws (marked by arrow) of the lamp, and slowly pick up the lamp by the handles. Never loosen any other screws.
- Insert the new lamp, and re-tighten firmly the 2 screws of the lamp that are loosened in the previous process to lock it in place.
- While putting the interlocking parts of the lamp cover and the projector together, slide the lamp cover back in place. Then firmly fasten the screw of the lamp cover.
Turn the projector on and reset the lamp time using the LAMP
TIME item in the OPTION menu.
- Press the MENU button to display a menu.
- Point at the ADVANCED MENU in the menu using the ▲/▼ cursor buttons, then press the ►cursor (or the ENTER button).
- Point at the OPTION in the left column of the menu using the ▲/▼ cursor buttons, then press the ►cursor (or the ENTER) button.
- Point at the LAMP TIME using the ▲/▼cursor buttons, then press the ► cursor (or the ENTER/ the RESET) button. A dialog will appear.
Click on picture to ZOOM
Reset the lamp time only when you have replaced the lamp, for
a suitable indication about the lamp.
