Disassembly
- Push the hooks and stand bottom away.
- Remove Hinge Cover.
- Loosen and remove6 screws to remove Stand Assy.
- Loose and remove5 screws.
- Separate Bezel hooks to take Bezel and Rear Cover apart.
- Lift up Rear Cover
CLICK ON THE PICTURES TO MAGNIFY
- Lift up Inverter slightly, and Separate its head from the housing at ADPCBA
- Remove the taps on X-board FPC.
- Pull out the X-Board FPC
- Loose and remove 4 screws
- Remove AD PCBA
- Disassemble PCBA complete.
- Lift up LCD module and remove bezel.
- Separate both Audio Cable.
PART & NUMBERS