TX-32PD30 - TX-36PD30 - PANASONIC - Adjustments - Voltage Confirmation - Self Check

CLICK ON THE PICTURES TO ZOOM IN

ADJUSTMENT PROCEDURE

SELF CHECK

• Self-Check is used to automatically check the bus lines and hexadecimal code of the TV set.  To get into Self-Check mode press the down (-/v)button on the customer controls at the front of the TV set, at the same time pressing the STATUS button on the remote control, and the screen  shown below.
• To exit Self-Check, switch off the TV set at the power button.

If the CCU ports have been checked and found to be incorrect or not located then " - - " will appear in place of "O.K.".

ALIGNMENT SETTINGS

1. Set the Bass to maximum position, set the Treble to minimum position, press the down button (- / v)on the customer controls at the front of the TV and at the same time press the INDEX button on the remote control, this will place the TV into the Service Mode.
2. Press the RED / GREEN buttons to step up / down through the functions.
3. Press the YELLOW / BLUE buttons to alter the function values.
4. Press the STR button after each adjustment has been made to store the required values.
5. To exit the Service Mode, press the "N" button.