APPLICABLE TO - DVP-S300, DVP-S500D, DVP-C600D, DVP-S330, DVP-S530D, DVPS550D, DVP-S3000, DVP-S7000, DVP-S7700
DVP-S300, DVP-S500D, DVP-C600D
NO POWER ON, NO OPERATION
Symptom:(2110)
Operating the DVD player and Power on may work intermittently. This may
be caused by a short circuit between the FPC terminals of the rotary encoder. This
encoder is located on the front panel.
Solution: Replace the rotary encoder with a new one listed in the table
below.
DVP-S3000, DVP-S7000
Subject: UNIT MAY NOT PLAY DUAL LAYER DVD.
Symptom:
(1312) The unit may not be able to play some dual layer DVD’s.
Solution: Verify following IC140 versions, using Diagnostics
Test Mode Menu (Other Checks). If the DRVCon is not updated to latest version,
replace IC140 as per the table below. Be sure to do the auto drive alignments
after the IC140 is replaced. If the units are being repaired for the dual layer
issue only, then service is done as in warranty status. Verify the repair by testing
unit with a commercial Dual Layer DVD.
DVP-S300, DVP-S500D
Subject: CLICK NOISE MAY PRESENT WITH AUDIODIGITAL CONNECTION.
Symptom:
(2544) When playing a DVD disc,noise may present when pressing function
buttons, for example NEXT/PREV.This noise may be heard when an Optical/Coaxial connection is made to the AC-3 Decoder. If the symptom appears then do
the following.
Solution: Replace the SYSCON ROM IC803 and the A/V DECODER (IC203) new version.
These IC are located on the MB-78 board.
DVP-S300, DVP-S500D
Subject: SYSCON ROM VERSION (2.3) AVAILABLE FOR LISTED SYMPTOMS.
Symptom:
(2351) The following symptoms may appear on the DVD player.
1. Loss A/V Synchronization. Sometimes with certain DVD like "STAR
GATE", "OLIVER", A/V Sync loses lock. Picture may disappear
intermittently.
2. Closed Caption Display appears with the same character when the unit
is in SLOW FWD playback mode. The characters should be changing.
3. Current sound status appears in which front panel displays 2/R for
about 1 second, after Power onor Power down, the dimmer setting is at OFF.
4. When DVD player is placed in STOP, and then Chapter search is done, The
unit will play a (TITLE) that is not the correct (TITLE) as indicated on display.
5. If CD or Video CD is stopped during play, and PLAY is pressed again.
The unit may not playback. (Note: CD and Video-CD show this problem if they have
short-recorded time. (About 5minutes)
6. When using the DVD Pioneer Karaoke Library Disc (Region 1) no vocal sound
comes from the speaker, even if Audio Changebutton is pressed to change the
sound.
Solution: If these symptoms occur replace SYSCON ROM IC803on the MB-78
Board.
DVP-S330
Subject: UNIT MAY POWER OFF OR FREEZE, WHEN LANGUAGE (OSD) IS CHANGED
Symptom:
(111*) When unit is set-up (OSD) in language French, Spanish, etc., and
Bit Rate History is displayed; the unit may power off. Bit rate history can be
selected
in advanced menu. NOTE:This is not a problem if language is setup in English,
Dutch, or Danish.
Solution: Replace SYSCON IC205 with improved version IC206. Version
1.95. The IC package type is different for IC206, so remove IC205 and use the
PC mounts
for IC206. Check Sum of IC206 is FB00 , which can be checked in TEST MODE
of SYSCON DIAGNOSIS.