POWER SUPPLY - SCHEMATIC
POWER AMP
CLICK ON THE PICTURES TO MAGNIFY
UNLOCKING THE DISC TRAY
This is to prevent the theft of discs appliances demonstration in
stores.
procedure:
1. Press [Power] to turn the unit.
2. Press the [CD] button to select this function.
3. For 5 seconds Press the [Stop] and [Eject] keys together.
4. The "UNLOCKED" message appears and the tray will released.
Note: When "LOCKED" appears, the lock will not be released to
disconnect the unit from the [Power] button.
COLD RESET
The cold reset clears all data the device, including those saved in
EEPROM, placing the device on your terms.
initials. Run it to return the unit to the consumer.
procedure:
1. Press the [Power] to turn the unit.
2. Press the [Stop] button, [ENTER] and [Power] simultaneously.
3. The message "COLD RESET" appears in the display. After that
the display turns off and the device is reset.
METHOD OF DUTY CD
This mode allows you to freely move the sled motor. Use it when you
want to clean the optical drive.
procedure:
1. Press the [Power] to turn the unit.
2. Press the [CD] button to select the function.
3. Press the [Stop] button, [METER MODE] and [OPEN / CLOSE] simultaneously.
4. Activates the service mode of the CD. The message "SERVICE MODE
"appears on the fluorescent display.
5. The disc is stopped, press the [>>] button to move the the
unit for the outermost track and [<<] to the innermost. The "SLED OUT" or "SLED
IN" message appears on the display.
6. To turn the laser, press the [>>|] button. The message
"LD ON" or "OFF RB" on the display.
7. To exit this mode, press the [Power].
AGING MODE CD
This mode can be used to check the operation of the CD. If an error occurs the aging mode will stop
and the error status will be displayed. If no error occurs, the aging mode
remains repeatedly.
procedure:
1. Press the [Power] to turn the unit.
2. Select the CD function.
3. Place three discs in the tray.
4. Press the [PLAY MODE] button repeatedly to control remote to select
"ALL DISCS" mode and then press [REPEAT] repeatedly to select
"REPEAT OFF".
5. Press the [Stop] button, [METER MODE] and [DISC SKIP /EX-CHANGE]
simultaneously.
6. The aging mode starts.
7. To exit this mode press the [Power] to disconnect the ca-bod and
power outlet.