Thursday, July 23, 2015

PALSONIC and DAEWOO TFTV93HDT LCD TV – TROUBLESHOOTING – SMPS POWER SUPPLY SCHEMATIC

Daewoo & Palsonic LCD TVs TFTV68HDT TFTV81HDT TFTV93HDT TFTV106HDT SMPS Circuit diagram & Troubleshooting Procedure
GENERAL TROUBLESHOOTING
TV does not response or remote controller does not work.
 Check the power cord to be plugged.
Check the battery of the remote controller.
Sound is discontinuous or broken sometimes.
Check if [SOUND] > [AVC] is [ON].
Set the sound effect into 'F Mono'.
Set the [SOUND] > [DTV Volume] into proper value.
[DTV Volume] is enabled only in digital program.
Picture of digital program is sometimes broken and sound is discontinuous.
Digital program has a little problem because of signal receiving status.
Check if the RF cable is correctly connected.
Ask for the broadcasting station if the RF cable connection has no problem.
Picture of analog program is noisy.
Check the RF cable connection.
Check if [Picture] > [Noise Reduction] is ON.
Change the [Install] > [Programme Setup] > [Fine] value.
Sound is not generated in HDMI mode.
Reconnect HDMI jack.
DVI signal has no sound. Check the output signal of device to be connected to LCD TV.
If you want to use DVI-HDMI In spite of 'Auto Setup', picture size is not completely adapted to the screen.
Check if the input signal is available.
Ensure that the desktop has no black area. 
Some errors (picture position problem) will be occurred according to certain video card. In this case, you should adjust 'Frequency' control.cable, you should also connect audio cable into the LCD TV.
In spite of 'Auto Setup', picture is not clear.
Adjust 'Phase' control.
TFTV68HDT, TFTV81HDT, TFTV93HDT - SMPS CIRCUIT
FEL-42C1 : TFTV106HDT  - SMPS CIRCUIT
SMPS TROUBLESHOOTING
CLICK ON THE PICTURES TO MAGNIFY