Monday, July 20, 2015

TSS-800 INFINITY TOTAL SPEAKER SOLUTIONS _Specifications_Exploded View _ Schematic Daigram

TOTAL SPEAKER SOLUTIONS (TSS) INFINITY TSS-800 – Circuit Diagram – Exploded view
Nominal Impedance: 8 Ohm.
Crossover Frequency: 3.5kHz;   12dB/Octave 3.5kHz;   12dB/Octave
Midrange Driver(s): 87mm (3-1/2") MMD®,   Dual 87mm (3-1/2") MMD®, magnetically shielded. 
High-Frequency Driver: 19mm (3/4") MMD®, 19mm (3/4") MMD®, magnetically shielded.
Dimensions (H x W x D): 232mm x 95mm x 70mm 95mm x 330mm x 70mm
(9-1/8" x 3-3/4" x 2-3/4") (3-3/4" x 13" x 2-3/4")
Weight: 1.1kg (2.5 lb) 2kg (4.5 lb)
Powered Sub-woofer
Frequency Range: 34Hz – 150Hz (±3dB)
Amplifier Output: 150 Watts RMS, 300 Watts Peak
Low-Frequency Driver: 250mm (10")
Crossover Frequency: 50Hz – 150Hz, 24dB/Octave, continuously variable
Dimensions (H x W x D): 400mm x 356mm x 381mm
(15-3/4" x 14" x 15")
Weight: 15.7kg (34.6 lb)
  Use high-quality speaker wire to make your connections. #18-gauge speaker wire with polarity coding is included. For longer distances, #16-gauge or heavier wire is recommended. The side of the wire with a ridge or other coding is usually considered positive polarity (i.e., +). Also, consult the owner’s manuals that were included with your amplifier or receiver to confirm connection procedures.
Do not reverse polarities (i.e., + to –, or – to +) when making connections. Doing so will cause poor imaging and diminished bass response. Be certain that positive and negative wire strands are completely isolated to avoid short circuits that may damage your equipment.
EXPLODED VIEWS
PWB
PRE-AMPLIFIER SCHEMATIC
LIMITER
POWER AMPLIFIER
CLICK ON THE PICTURES TO ZOOM IN