REFRIGERATOR-FREEZER Sharp SJ-58LM-C2W/C2G/C2B_SJ-63LM-C2W/C2G/C2B_
SJ-68LM-C2W/C2G/C2B/C2S – Disassembly
Door removal and installation
1. Remove the evaporating pan cover, upper hinge cover, and 2 screw
covers.
(Carefully remove the upper hinge cover using a screwdriver, making sure that
the door cap is not damaged.)
2. Remove the upper hinge and detach the upper door. (To remove the door, lift it off the center hinge.)
3. Remove the center hinge and lift the lower door off the bottom hinge.
4. Remove the bottom hinge and spacer.
5. Remove the nylon bearing and bearing cap on the top of each door and attach the parts D, E, and F.
6. Remove the door stopper and stopper spring on the bottom of each door.
7. Remove the screw on the left of the door bottom and make a hole with a screwdriver for the insertion of the stopper spring.
8. Attach each door stopper and the parts B and C.
9. Apply silicon grease J to the shaded portion of the part A and attach it to the left side together with the spacer.
10. Insert the lower door and fit the center hinge. If the washer is provided, install it ON top. Tighten the screws temporarily.
11. Fit the upper door and attach the upper hinge. Tighten the screws temporarily.
12. Adjust the alignment of the door. Ensure that the gap between the cabinet and door cap is 11.3 mm. Tighten the upper hinge screws.
13. Secure the upper door. Open the lower door and tighten the center hinge screws. (No drawing is provided.)
14. Check that the distance to activate the door switch is correct and that each door opens and closes smoothly. To readjust the door position, loosen the center and bottom hinges.
15. Apply silicon grease J to the shaded portion of the door packing.
16. Attach the parts G and H.
17. Fit the cap in the evaporating pan cover into the notch on the right.
18. Reattach the evaporating pan cover and upper hinge cover.
19. After the above steps have been completed, check that each door functions correctly and that the interior lamp lights up and goes off when the door is opened and closed. (No drawing is provided.)
2. Remove the upper hinge and detach the upper door. (To remove the door, lift it off the center hinge.)
3. Remove the center hinge and lift the lower door off the bottom hinge.
4. Remove the bottom hinge and spacer.
5. Remove the nylon bearing and bearing cap on the top of each door and attach the parts D, E, and F.
6. Remove the door stopper and stopper spring on the bottom of each door.
7. Remove the screw on the left of the door bottom and make a hole with a screwdriver for the insertion of the stopper spring.
8. Attach each door stopper and the parts B and C.
9. Apply silicon grease J to the shaded portion of the part A and attach it to the left side together with the spacer.
10. Insert the lower door and fit the center hinge. If the washer is provided, install it ON top. Tighten the screws temporarily.
11. Fit the upper door and attach the upper hinge. Tighten the screws temporarily.
12. Adjust the alignment of the door. Ensure that the gap between the cabinet and door cap is 11.3 mm. Tighten the upper hinge screws.
13. Secure the upper door. Open the lower door and tighten the center hinge screws. (No drawing is provided.)
14. Check that the distance to activate the door switch is correct and that each door opens and closes smoothly. To readjust the door position, loosen the center and bottom hinges.
15. Apply silicon grease J to the shaded portion of the door packing.
16. Attach the parts G and H.
17. Fit the cap in the evaporating pan cover into the notch on the right.
18. Reattach the evaporating pan cover and upper hinge cover.
19. After the above steps have been completed, check that each door functions correctly and that the interior lamp lights up and goes off when the door is opened and closed. (No drawing is provided.)
R-CONTROL COV. ASSEMBLY
Sticking of sealer
C-box
base & Forming sensor of Damper Thermostat
Lamp socket fixing – De-frost timer –
Fixing of R-box cover
E.V Cover assembly
Fan motor and Fan fixing
Setting of E.V cover assembly & F-Thermostat
Cooling unit
Click on the Pictures to Magnify
