If the screen flicker, or do not turn ON, replacing the LCD screen may solve that problem.
Remove the battery first.* Using your fingers, slide the battery compartment door to the right until it unlocks.
* Rotate the door along hinges to open.
* Take out the battery with your fingers.
Removal
of the back face
* Remove
2-3.4 mm screws that secure the back panel using a Phillips #000 screwdriver.
* Remove
4-4 mm screws on the left and right sides of the camera using a Phillips #000 screwdriver.
* Remove
2-4 mm screws that secure the bottom of the camera using a Phillips #000
screwdriver.
* Pull
back the rubber facing to access the A/V and HDMI output compartment.
* Remove
1-3.4mm screw inside the compartment using a Phillips #000 screwdriver.
* Once
all screws are removed, pull the back facing off with your fingers.
LCD screen replacement
* Remove
3-4.4 mm screws that secure the small metal plate using a Phillips #000 screwdriver.
* Carefully
pop out the LCD screen with your fingers.
To
reassemble the device, follow these instructions in reverse order.
