Wednesday, August 17, 2016

TCL LCD32B67 How to enter service mode – adjustments – SMPS and Audio Output schematic

TCL LCD32B67 SERIES LCD TV MONITOR – Factory mode – Adjustments - SMPS ADPF24180A2, Power, LVDS and Audio Output circuit diagram
How to enter Service Mode (Factory Mode)
Press Number key 100 > 9 > 9 > 9 will into the factory mode.
Press the Menu key.
The OSD will show menu and a word F at Right top of Menu.
Service mode adjustments
WHITE-BALANCE, LUMINANCE ADJUSTMENT
Approximately 30 minutes should be allowed for warm up before proceeding white balance adjustment.
Before started adjust white balance ,please setting the Chroma-7120 MEM. Channel 1 to 9300 color, MEM.  channel 2 to 6500 color, MEM. channel 3 to 11000 color,and MEM. channel 4 to 9300 color, ( our 9300 parameter is x = 283 ± 20, y = 297 ± 20, Y = 350 ± 7 cd/m2 ; 6500 parameter is x = 313 ± 20, y = 329 ± 20, Y = 350± 7 cd/m2 ; 11000 parameter is x = 274 ± 20, y = 286 ± 20, Y = 460 ± 7 cd/m2 ;9300 parameter is x = 283 ± 20, y = 297 ± 20, Y = 460 ± 7 cd/m2;7000 parameter is x = 305 ± 20, y = 320 ± 20, Y = 460 ± 7 cd/m2 )
How to setting MEM.channel you can reference to Chroma-7120 user guide or simple use “ SC” key and “ NEXT” key to modify x,y,Y value and use “ID” key to modify the TEXT description
Following is the procedure to do white-balance adjust.
Press Number key 100  9  9  9 will into the factory mode, and press Menu key the OSD will show menu and a
word F at Right top of Menu.
In the factory mode select MORE function will into Bias and Gain adjustment.
1. ADC Adjustment:
AL > Auto level adjust.
RG, GG, BG > R, G, B Gain adjust.
RB, GB, BB > R, G, B Bias adjust.
2. SCALER Adjustment:
CO, BR > Contrast and Brightness adjust.
RG, GG, BG > R, G, B Gain adjust.
RB, GB, BB > R, G, B Bias adjust.
S9, S6, ST , SH > Save 9300, 6500, 9300 color temperature.
R9, R6, RT , RH > Recall 9300, 6500, 9300 color temperature.
BI > Setup Burn-in mode ON / OFF .
ISP > Set ISP ON/OFF .
PP > Set PIP ON/OFF .
WH > Set Wireless Headphone ON/OFF .
SR > Set SRS ON/OFF.
CC > Set Close Caption ON/OFF.
VC > Set V Chip ON/OFF.
EX > Exit MORE function to factory mode menu.
SMPS ADPF24180A2 schematic
Power
LVDS
Audio output
Bias (Low luminance) adjustment :
1. Press “ AUTO” button ,
2. Set the contrast on OSD window to the value=51 , color (user )R,G,B set to “50”
3. adjust the brightness on OSD until chroma 7120 measurement reach the value Y>390 cd/m2
Gain adjustment 
A. Adjust 9300 color-temperature
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m2
2. Switch the chroma-7120 to RGB-mode (with press “MODE” button )
3. Switch the MEM.channel to Channel 01 ( with up or down arrow on chroma-7120 )
4. The LCD-indicator on chroma-7120 will show x = 283 ± 20, y = 297 ±20, Y = 350 ± 7 cd/m2
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure (Item 5, 6, 7) until chroma-7120 RGB value meet the tolerance =100±2
9. Switch the chroma-7120 to xyY mode with press “MODE” button
10. Press Color (9300) on OSD window to save the adjustment result.
B. Adjust 6500 color-temperature
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m2
2. Switch the chroma-7120 to RGB-mode (with press “MODE” button )
3. Switch the MEM.channel to Channel 02 (with up or down arrow on chroma-7120 )
4. The LCD indicator on chroma-7120 will show x = 313 ± 20 y = 329 ± 20, Y = 350 ± 7 cd/m2
5. Adjust the Color (user)Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user)Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user)Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure ( item 5,6,7) until chroma-7120 RGB value meet the tolerance =100 ± 2
9. Switch the chroma-7120 to xyY mode with press “MODE” button
10. Press Color (6500) on OSD window to save the adjustment result.
C. Adjust 11000 color-temperature
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m2
2. Switch the chroma-7120 to AV-mode (with press “MODE” button)
3. Switch the MEM.channel to Channel 03 ( with up or down arrow on chroma-7120 )
4. The lcd-indicator on chroma-7120 will show x = 274± 20, y = 286 ± 20, Y = 460 ± 7 cd/m2
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure ( item 5,6,7) until chroma-7120 RGB value meet the tolerance =100 ± 2
9. Switch the chroma-7120 to xyY mode with press “MODE” button
10. Press Color (11000) on OSD window to save the adjustment result.
D. Adjust 9300 color-temperature
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>390 cd/m2
2. Switch the chroma-7120 to AV-mode (with press “MODE” button)
3. Switch the MEM.channel to Channel 04 ( with up or down arrow on chroma-7120 )
4. The LCD indicator on chroma-7120 will show x = 283 ± 20, y = 297 ± 20, Y = 460 ± 7 cd/m2
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure (item 5, 6, 7) until chroma-7120 RGB value meet the tolerance =100 ± 2
9. Switch the chroma-7120 to xyY mode with press “MODE” button
10. Press Color (9300) on OSD window to save the adjustment result.
E. Adjust 7000 color-temperature
1. Set the Contrast of OSD function to 45 and Adjust Brightness to chroma-7120 Y>470 cd/m2
2. Switch the chroma-7120 to AV-mode (with press “MODE” button )
3. Switch the MEM.channel to Channel 05 ( with up or down arrow on chroma-7120 )
4. The LCD indicator on chroma-7120 will show x = 305 ± 20, y = 320 ± 20, Y = 460 ± 7 cd/m2
5. Adjust the Color (user) Mode: RED on OSD window, until chroma 7120 indicator reached the value R=100
6. Adjust the Color (user) Mode: GREEN on OSD window, until chroma-7120 indicator reached the value G=100
7. Adjust the Color (user) Mode: BLUE on OSD window, until chroma-7120 indicator reached the value B=100
8. Repeat above procedure (item 5, 6, 7) until chroma-7120 RGB value meet the tolerance =100 ± 2
9. Switch the chroma-7120 to xyY mode with press “MODE” button
10. Press Color (7000) on OSD window to save the adjustment result.
Turn the POWER-button off to on to quit from factory mode ( in USER-mode, the OSD window location was placed at middle of screen)