TO ENTER AND LEAVE SERVICE MODE
- Enter factory password. Use customer remote control handset.
- Set the TV as RF condition and press remote control "Prog" key and follow by '6' '4' '8' '3'
- Repeat the same step, to enter White Balance Adjustment.
- Repeat the same step, to enter into "Factory Mode"adjustment condition.
- Repeat the same step to enter into 'Factory Mode Setting" condition.
- Repeat the same step to 'Leave" the Factory Mode function.
Use factory mode remote control unit, press the "Factory" key to enter into Factory Mode function. Press one more time "Factory" key to enter "White Balance" adjustment condition, press one more time to enter the adjustment condition. Press one more "Factory" key to setting up requirement spec: Last press once "Factory" key to leave factory mode function.
Use "Factory Mode" for TV aging, second step to align the White Balance in good condition. Third step adjust the required electrical specifications. The function adjustments have 20 selections. Other function of adjustments are 39 items, and can use [P+/P-] key and [V+/V-] key for selection and adjustment.
SETTING OF COMPANY LOGO
- Switch ON the TV set, and set the TV in [AV] mode. Press control "Disp" key and the TV screen will display 'AV" and follow by presetting the numeric key ['6' '4' '8' '3'] to enter the company logo setting.
- Press [P+/P-] for selection of function, and press [V+/V-] key for adjustment. Press [>*<] key to change or selct your requirement.
- Logo setting 1st row that come with 4 kinds of settings.
- Logo setting 2nd row that come with 2 kinds of settings. 1st turn OFF the display, second turn ON the display. {Display the word setting of maximum 10 words}.
- When the 2 rows of words are display on screen, can check the word positioning. Not too close to each other or the words are not clear to display on the screen. Re-set the logo words from the logo setting factory mode.
