Tuesday, June 19, 2012

HOW TO ENTER SERVICE MODE TO CALCOM [UOC TOP] CLOCK CTV CHASIS



TO ENTER SERVICE MODE TO CALCOM NEW CTV CHASSIS  [UOC-TOP] (CLOCK CTV CHASSIS)
  • To enter service mode, press "Menu" key and select & open picture submenu.  Then press [1 => 1=> 4 => 7=> 7] through remote control.  B/W mode will display on screen. 
  • Press "Recall" key by remote for service menu [MO] & press "mute" key to change service mode [M1] & [M2]
  • To exit from service menu, press "Recall" button on the remote control.  "Factory' mode will display on the screen, then press "Standby" key by remote.
WHITE BALANCE ADJUSTMENT THROUGH CUSTOMER REMOTE
  1. Tune to set Greay Scale Pattern.
  2. Set Brightness to [50], Contrast to [50] and color to [50].
  3. Enter into B/W balance mode as indicated above.
  4. Set R-Bias > 30. G-Bias > 30. B-Bias > 30. GDRV > 30. BDRV > 30 in service mode.
  5. Press 'Mute'" key to get a Horizontal line acorss the screen and see the domain color in the H-Line. Add opposite color by adjusting R-Bias, B-Bias or G-Bias, to get a pure white horizontal line across the screen.
BRAND NAME DISPLAY
  • Enter into service mode, by pressing [Mute] select & open [Picture] sub-menu.
  • Press numeric code [1-1-4-7-7].  B/W mode will display on screen.
  • Press [Recall] key three times for 'Logo" editing.
  • Use 1 or 2 direct keys through remote for vertical Up/Dn position
  • Use 3 of 4 direct keys through remote for Horizontal Left or Horizontal Right position.
  • Use 5 or 6 direct keys to adjust Upper or lower line color.
  • Use 7 or 8 direct keys by remote control for Upper or Lower line letter size. 
  • Press 'Pro+" key to change or select character [A toZ] and some symbols.
  • Press Vol+/- to change the character location.
  • To exit from Logo Editing mode, Press "Recall" then "Menu" key and select picture sub menu then press numeric code (1-1-4-7-7) digit keys on remote control
  • After completion of all entries, switch OFF the TV by its main ON/OFF switch.
Speaker impedence for this chasis sound output is *Ohms 15W.  Use [8U15W] speakers, in both channels for correct sound output.

The kit is can be fitted to 14" to 21" TV sets.