Friday, June 29, 2012

PHILIPS and ELEMENT TV REPAIR HINTS



PHILIPS 42PF7220/37

No picture, No sound.  TV turns On & OFF automatically.

Missing voltages from the power supply to other boards.  Check and resolder all connection terminals at the connector [C221].

PHILIPS PFL 37 xxxxx LCD TV

TV turns ON, but shuts down for no reason.  It happens each time when switch ON the set by AC mains ON/OFF switch.  
Signal to microprocessor get On/OFF.  Develops this fault.  Bad front panel sendor board [infrared].  Capacitor faults. Some of the SMD capacitors fitted on it are leaking, cause voltag drop. 

ELEMENT 32" LCD RECEIVER.

TV turns ON.  But, No video or Audio.

If the +12V supply rail drop, this kind of fault can occur.  In practice, it was measure +7.6VDC instead of +12V, and +13VDC instead of +24V
Changed the optocoupler. Check the power supply and replace the voltage control opto-coupler.